Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General advice

Immediate medical attention is required.Show this safety data sheet(SDS) to the doctor in attendance.

Eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician if feel uncomfortable.

skin contact

Take off contaminated clothing and shoes immediately. Wash off with plenty of water for at least 15minutes and consult a physician if feel uncomfortable.

Inhalation

Move victim into fresh air. If breathing is difficult , give oxygen. Do not use mouth to mouth resuscitation if victim ingested or inhaled the substance, IF not breathing ,give attificial respiration and consult a physician immediately.

Ingestion

Do not induce vomiting.Never give anything by mouth to an unconscious person.Call a physician or

Poison Control Center immediately.

Protecting of First-aiders

Ensure  that  medical  personnel  are  aware  of  the  substance  involved.  Take  precautions  to  protect themselves and prevent spread of contamination.

Most Important Symptoms and Effects, both Acute and Delayed

Substance accumulation, in the human body, may occur and may cause some concern following repeated or long-term occupational exposure.

Indication of Any Immediate Medical Attention and special Treatment Needed

Treat symptomatically.

Symptoms may be delayed.

Fire-fighting measures

Extinguishing Media

Suitable Extingushing Media       Dry chemical,carbon dioxide or alcohol-resistant foam.

Unsuitable Extinguishing Media       Do not use a solid water stream as it may scatter or spread fire.

Special Hazards Arising from the Substance or Mixture.

Fire may produce irritating, poisonous or corrosive gases.

Containers may explode when heated.

Fire exposed containers may vent contents through pressure relief valves.

May expansion or decompose explosively when heated or involved in fire..

Advice for Firefighters

As in any fire,wear self-contained breathing apparatus (MSHA/NIOSH approved or equivalent) and

full protective gear.

Fight fire from a safe distance, with adequate cover.

Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

Personal Precautions, Protective Equipment and Emergency Procedures

Ensure adequate ventilation ,Remove all sources of ignition.

Evacuate personnel to safe areas,Keep people away from and upwind of spill/leak.

Use personal protective equipment. Avoid breathing vapours , mist, gas or dust.

Environmental precautions

Prevent further leakage or spillage if safe to do so.

Discharge into the environment must be avoided.

Methods and Materials for Containment and Cleaning up

Absord spilled material in dry sand or insert absorbent, In case of large amount of spillage, contain a

spill by bunding.

Adhered or collected material should be promptly disposed, in accordance with appropriate laws and

regulations.

Remove all sources of ignietion, Use spark-proof tools and explosion-proof equipment.

Handling and storage

Precautions for handling

Handling is performed in a well ventilated place.

Wear suitable protective equipment.

Avoid contact with skin and eyes.

Keep away from heat/sparks/open flames/hot surfaces.

Take precautionary measures against static discharges.

Precautions for Storage

Keep containers tightly closed.

Keep containers in a dry, cool and well-ventilated place.

Keep away from heat/sparks/open flames/hot surfaces.

Store away from incomlatible materials and foodstuff containers.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control Parameters

Occupational Exposure Limit Values

No information available Biological Limit Values No information available

Monitoring Methods

EN 14042 Workplace atmospheres,Guide for the applications and use of procedures for the

assessment of exposure to chemical and biological agents.

GBZ/T 160 Determination of toxic substances in workplace air (Series standard).

Engineering Controls

Ensure adequate ventilation,especially in confined areas.

Ensure that eyewash stations and safely showers are close to the workstation location.

Use explosion-proof electrical/ventilating/lighting/equipment.

Set up emergency exit and necessary risk-elimination area.

Personal Protection Equipment

Eye/face protection

Tightly fitting safely goggles (approved by EN 166(EU) or NIOSH (US).

Hand Protection

Wear protective gloves (such as butyl rubber),passing the tests according to EN 374 (EU),US F739 or AS/NZS 2161.1 standard.

Respiratory protection

Experienced,use a full-face respirator with multi-purpose combination (US) or type AXBEK(EN

14387)respirator cartridges.

Skin and Body Protection

Wear fire/flame resistant/retardant clothing and antistatic boots.

Stability and reactivity

Reactivity

Contact with incompatible substances can cause decomposition or other chemcical reactions. Chemical stability

Stable under proper operation and storage conditions. Possibility of Hazardous Reactions

No information available Conditions to avoid

Incompatible materials, heat, flame and spark.

Incompatible materials

No information available

Hazardous Decomposition products

Under normal conditions of storage and use,hazardous decomposition product should not be produced.

Disposal considerations

Waste Chemicals

Before disposal should refer to the relevant national and local laws and

regulation. Recommend the use of incineration disposal.

Contaminated packaging

Containers may still present chemical hazard when empty.keep away from hot and ignition source of fire.Return to supplier for recycling if possible.

Categories Display