Registration Dossier

Physical & Chemical properties

Flash point

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flash point of flammable liquids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
23-07-2019 to 13-08-2019
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: Guideline study performed under GLP. All relevant validity criteria were met.
Qualifier:
according to
Guideline:
other: ASTM D7094: "Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester", 2012.
Deviations:
no
Qualifier:
equivalent or similar to
Guideline:
EU Method A.9 (Flash-Point)
Deviations:
no
Qualifier:
equivalent or similar to
Guideline:
ISO 3679 (Determination of flash point - Rapid equilibrium closed cup method)
Deviations:
no
Qualifier:
equivalent or similar to
Guideline:
ISO 2719 (Determination of flash point - Pensky-Martens closed cup method)
Deviations:
no
Qualifier:
equivalent or similar to
Guideline:
other: UN Transport of Dangerous Goods: Manual of Tests and Criteria: ST/SG/AC.10/11/Rev.6 Paragraph 32.4.1: Non-Viscous Flammable Liquids (2009)
Deviations:
no
Qualifier:
equivalent or similar to
Guideline:
ASTM D93 (Standard test methods for flash point by pensky-martens closed cup tester)
Deviations:
no
GLP compliance:
yes
Type of method:
equilibrium method closed cup
Flash point apparatus:
other: Eraflash flash-point tester
Flash point:
124 °C
Atm. press.:
101.325 kPa
Remarks on result:
other: Duplicate determination; completed at atmospheric pressure
Interpretation of results:
GHS criteria not met
Conclusions:
The flash point of the test item was determined to be 124 °C at 101.325 kPa.
Executive summary:

The flash point was determined according to ASTM D7094, equivalent or similar to EU Method A.9, using an Eraflash flash-point tester in the closed cup method consistent with ISO 3679, ISO 2719, ASTM D93 and ASTM D7094: Modified Continuously Closed Cup Flash Point (MCCCFP) test under GLP. The Eraflash tester employs a small volume of test item which reduces the risk of fires or other uncontrolled reactions of substances with an unknown flash point. The test cup was filled with approximately 2 mL test item and placed in the holder of the flash-point tester. The sample was stirred during heating. The ignition of the sample vapour was performed by an electric arc and ignition was automatically detected by the flash point tester. The flash-point is automatically corrected for atmospheric pressure by the flash point tester. Following a preliminary test starting at 25°C, an attempt was made to ignite the vapour of the test item for every 2°C temperature rise. The test cup was heated at a rate of 5 ± 0.5°C/minute. The estimated flash point was 123°C. The definitive test was conducted in duplicate. Starting at 100 °C ignition was tested for every 2°C temperature rise. Test 1 indicated a flash point of 124°C. Test 2 indicated a flash point of 124°C. Under the conditions of the study, the flash-point of the test item is 124 °C at 101.325 kPa.

Description of key information

FP: 124 °C at 101.325 kPa atmospheric pressure, ASTM D7094, 2019

Key value for chemical safety assessment

Flash point at 101 325 Pa:
124 °C

Additional information

Key study : ASTM D7094, 2019 : The flash point was determined according to ASTM D7094, equivalent or similar to EU Method A.9, using an Eraflash flash-point tester in the closed cup method consistent with ISO 3679, ISO 2719, ASTM D93 and ASTM D7094: Modified Continuously Closed Cup Flash Point (MCCCFP) test under GLP. The Eraflash tester employs a small volume of test item which reduces the risk of fires or other uncontrolled reactions of substances with an unknown flash point. The test cup was filled with approximately 2 mL test item and placed in the holder of the flash-point tester. The sample was stirred during heating. The ignition of the sample vapour was performed by an electric arc and ignition was automatically detected by the flash point tester. The flash-point is automatically corrected for atmospheric pressure by the flash point tester. Following a preliminary test starting at 25°C, an attempt was made to ignite the vapour of the test item for every 2°C temperature rise. The test cup was heated at a rate of 5 ± 0.5°C/minute. The estimated flash point was 123°C. The definitive test was conducted in duplicate. Starting at 100 °C ignition was tested for every 2°C temperature rise. Test 1 indicated a flash point of 124°C. Test 2 indicated a flash point of 124°C. Under the conditions of the study, the flash-point of the test item is 124 °C at 101.325 kPa.