Registration Dossier

Administrative data

First-aid measures

- General advice: Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.
- Following inhalation: Move to fresh air. Call a physician if symptoms develop or persist.
- Following skin contact: Wash off with soap and water. Get medical attention if irritation develops and persists.
- Following eye contact: Rinse with water. Get medical attention if irritation develops and persists.
- Following ingestion: Rinse mouth. Get medical attention if symptoms occur.
- Most important symptoms and effects: Direct contact with eyes may cause temporary irritation.

Fire-fighting measures

- Suitable extinguishing media: Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
- Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.
- Special hazards arising from the substance or mixture: During fire, gases hazardous to health may be formed.
- Advice for fire fighter: Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Move containers from fire area if you can do so without risk. Use standard firefighting procedures and consider the hazards of other involved materials.

Accidental release measures

- Personal precautions: Keep unnecessary personnel away. Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment. Wear safety glasses with side shields (or goggles). Wear appropriate chemical resistant gloves. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Wear appropriate thermal protective clothing, when necessary. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.

- Protective equipment and emergency procedures: See above.

- Environmental precautions: Avoid discharge into drains, water courses or onto the ground.

- Methods and material for containment and cleaning up:
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Never return spills to original containers for re-use. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions).
Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations.

Handling and storage

- Precautions for safe handling: Observe good industrial hygiene practices.
- Conditions for safe storage, including any incompatibilities: Store in original tightly closed container. Store away from incompatible materials (strong oxidizing agents). Recommended Packaging: Glass, Aluminum or Phenolic Lined Steel. Store tightly sealed under inert gas in a cool, well-ventilated area.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
14.1. - 14.6.: Not regulated as dangerous goods.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
14.1. - 14.6.: Not regulated as dangerous goods.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
14.1. - 14.6.: Not regulated as dangerous goods.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
14.1. - 14.6.: Not regulated as dangerous goods.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Technical protection measures
No exposure limits noted for ingredient(s).
No biological exposure limits noted for the ingredient(s). Follow standard monitoring procedures.
Wear appropriate thermal protective clothing, when necessary.
Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.


2. Organisational protection measures
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

3. Hand protection
Wear appropriate chemical resistant gloves.

4. Feet protection
Wear suitable protective clothing.

5. Body protection
Wear suitable protective clothing.

6. Eye protection
Wear safety glasses with side shields (or goggles).

7. Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment.

Stability and reactivity

1. Reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.

2. Chemical stability
Material is stable under normal conditions.

3. Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.

4. Conditions to avoid
Avoid temperatures exceeding the flash point. Contact with incompatible materials.

5. Incompatible materials
Strong oxidizing agents.

6. Hazardous decomposition products
No hazardous decomposition products are known.

Disposal considerations

Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner. Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations.