Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. In case of breathing difficulties, seek
medical attention.
Emergency measure - Eyes: Rinse immediately with plenty of water and seek medical
advice.
Emergency measure - Skin: Wash immediately with plenty of soap and water. remove
contaminated clothing. If symptoms occur, call a physician.
Wash contaminated clothing before reuse and dispose of
contaminated shoes.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide, dry chemical, alcohol-resistant
foam, universal-type foam

Product arising from burning: Carbon dioxide and carbon monoxide.

Product determined by test: N

Protective equipment: Wear full protective clothing, including
helmet,self-contained, positive pressure or pressure demand
breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: Contain spill. Evacuate unprotected personnel from hazard
area. Cover with absorbent material. Cover spill area with
Light Water Brand or other ATC foam. Collect using
non-sparking tools. Clean up residue with appropriate
organic solvents. Read and follow safety precautions on the
solvent label and MSDS. Place in an approved metal
container. Seal the container.

Handling and storage

Handling: When handling the preparation prior to incorporation into
printing plates:

Vented goggles, or a full face shield, and gloves should be
worn when handling the preparation. Appropriate local
exhaust ventilation should be maintained. If ventilation is
not adequate, then appropriate respiratory protection should
be worn. Maintain temperature 23 °C to 32 °C.

Storage: The preparation should be stored indoors, in
polyethylene/glass containers.

Packaging of the substance and or preparation: The preparations containing the substance are packaged in
polyethylene or glass.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: UN 1866
Transport: ADR: UN 1866, resin Solution, PG 111, Class 3

IMDG: UN 1866, Resin Solution, PG 111, Class 3.3
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not applicable.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: The substance is unlikely to be recoverable after it becomes
part of a printing plate. In the event that the preparation
is spilled, it should be swept up and collected.

Industry - Possibility of neutralisation: Substance does not have to be neutralised.

Industry - Possibility of destruction: controlled discharge: Dispose of in an approved chemical landfill, as allowed by
current laws and regulations.

Industry - Possibility of destruction - incineration: Dispose of in an approved chemical incinerator as allowed by
current laws and regulations.