Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

As a general rule, in case of doubt or if symptoms persist, always call a doctor.
NEVER induce swallowing by an unconscious person.

.1. Description of first aid measures
In the event of exposure by inhalation :
If breathing is irregular or has stopped, effect mouth-to-mouth resuscitation and call a doctor.

In the event of splashes or contact with eyes :
Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.
If there is any redness, pain or visual impairment, consult an ophthalmologist.

In the event of splashes or contact with skin :
Watch out for any remaining product between skin and clothing, watches, shoes, etc.

In the event of swallowing :
Do not give the patient anything orally.

In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a
doctor.
Seek medical attention immediately, showing the label.

Fire-fighting measures

Non-flammable.
.1. Extinguishing media

Suitable methods of extinction
In the event of a fire, use :
- foam
- powder

Unsuitable methods of extinction
In the event of a fire, do not use :
- water jet

.2. Special hazards arising from the substance or mixture
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.
Do not breathe in smoke.
In the event of a fire, the following may be formed :
- carbon monoxide (CO)
- carbon dioxide (CO2)
- sulphur dioxide (SO2)
nitrogen oxide (NO)
- nitrogen dioxide (NO2)

.3. Advice for firefighters
Due to the toxicity of the gas emitted on thermal decomposition of the products, fire-fighting personnel are to be equipped with
autonomous insulating breathing apparatus

Accidental release measures

.1. Personal precautions, protective equipment and emergency procedures
Consult the safety measures listed under sections "Handling and Storage" and "exposure Controls / personal Protection".
For first aid worker
First aid workers will be equipped with suitable personal protective equipment (See section Exposure controls/ Personal Protection").

.2. Environmental precautions
Prevent any material from entering drains or waterways.

.3. Methods and material for containment and cleaning up
Retrieve the product by mechanical means (sweeping/vacuuming) : do not generate dust.

Handling and storage

Requirements relating to storage premises apply to all facilities where the substance is handled.

.1. Precautions for safe handling
Always wash hands after handling.
Fire prevention :
Prevent access by unauthorised personnel.
Recommended equipment and procedures :
For personal protection, see section "Exposure controls/Personal protection"
Observe precautions stated on label and also industrial safety regulations.
Avoid inhaling dust.
Prohibited equipment and procedures :
No smoking, eating or drinking in areas where the substance is used.

.2. Conditions for safe storage, including any incompatibilities
Keep in the original packaging under inert atmosphere.
Store away from light.
Packaging
Always keep in packaging made of an identical material to the original.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Exempt from transport classification and labelling.

Exposure controls / personal protection

Exposure controls
Personal protection measures, such as personal protective equipment
Pictogram(s) indicating the obligation of wearing personal protective equipment (PPE) : Protective Glasses; protective mask
Use personal protective equipment that is clean and has been properly maintained.
Store personal protective equipment in a clean place, away from the work area.
Never eat, drink or smoke during use. Remove and wash contaminated clothing before re-using. Ensure that there is adequate
ventilation, especially in confined areas.
- Eye / face protection
Avoid contact with eyes.
Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.
- Hand protection
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
- Body protection
Work clothing worn by personnel shall be laundered regularly.
After contact with the product, all parts of the body that have been soiled must be washed.
- Respiratory protection
Avoid breathing dust.
Wear a disposable half-mask dust filter in accordance with standard EN149.

Stability and reactivity


.1. Chemical stability
This substance is stable under the recommended handling and storage conditions in section "Handling and Storage"

.2. Possibility of hazardous reactions
No data available.

.3. Conditions to avoid
Avoid :
- formation of dusts
Dusts can form an explosive mixture with air.

.4. Incompatible materials
Keep away from :
- strong oxidising agents

.5. Hazardous decomposition products
The thermal decomposition may release/form :
- carbon monoxide (CO)
- carbon dioxide (CO2)

Disposal considerations

Proper waste management of the substance and/or its container must be determined in accordance with Directive 2008/98/EC.

.1. Waste treatment methods
Do not pour into drains or waterways.

Waste :
Waste management is carried out without endangering human health, without harming the environment and, in particular
without risk to water, air, soil, plants or animals.
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Do not contaminate the ground or water with waste, do not dispose of waste into the environment.

Soiled packaging :
Empty container completely. Keep label(s) on container.
Give to a certified disposal contractor.