Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove patient to fresh air. Obtain medical attention.
Emergency measure - Eyes: Rinse with plenty of water for at least 15 minutes. Seek
immediate medical attention.
Emergency measure - Skin: Wash affected areas with soap and plenty of water. Seek
medical attention if irritation develops. Launder
contaminated clothing before re-use.
Emergency measure - Ingestion: Obtain medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water, dry powder or carbon dioxide may be used.

Product arising from burning: Products of combustion may contain oxides of carbon and
sulfur together with some soot.

Product determined by test: N

Protective equipment: Full protective clothing and a self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Wear suitable protective clthing, see 2.3.1 Evacuate
personnel from immediate vicinity. Dust formation should be
avoided. Absorb spillages of solutions with a suitable inert
material (eg. sand or soil). Carefully transfer the spillage
to suitably labelled waste containers, or use a sealed
industrial vacuum machine and dispose of in accordance with
local regulations by landfill or incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene. When exposure cannot
be prevented or adequately controlled by using engineering
control appropriate personal protective equipment should be
worn. Such protective equipment should conform to the
appropriate international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical protective clothing to Standard EN368

Eye protection to Standard prEN166.

When respiratory protective equipment has to be used, it
should conform to the appropriate international or national
standards, such as a dust mask conforming to EN149 FFP1.

Storage: Store in sealed containers in cool, dry conditions away from

sources of ignition.

Packaging of the substance and or preparation: UN standard polyethylene-lined fibre drums or HDPE

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Transport: No special precautions.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not anticipated, although as an organic micro-crystalline
potentially-dusty solid there is a potential dust explosion

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery for recycling is not economically or technically

Industry - Possibility of neutralisation: None known.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations. (A650)

Industry - Possibility of destruction - incineration: The substance, mixed with combustible solvent, can be
disposed of by incineration by burning under controlled
conditions at a licensed waste treatment processor in
accordance with local regulations. Stack gases should be
scrubbed to remove oxides of sulfur. (A661)

Industry - Possibility of destruction - water purification: Not permitted.

Public at large - Possibility of recovery/recycling: The substance will not enter the public domain.