Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 464-080-2 | CAS number: 613246-79-0
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: In case of discomfort, seek medical advice and show safety
data sheet.
Emergency measure - Eyes: Flush eyes with copious amounts of water for at least
15 minutes. Seek immediate medical attention and show
safety data sheet.
Emergency measure - Skin: Wash affected areas with copious amounts of water and soap.
In case of persistent skin irritation, search medical
attention and show safety data sheet.
Emergency measure - Ingestion: If swallowed, do not induce vomiting, seek medical advice
immediately and show safety data sheet.
In case of accident or if you feel unwell, seek medical
advice immediately (show label/safety data sheet where
possible).
data sheet.
Emergency measure - Eyes: Flush eyes with copious amounts of water for at least
15 minutes. Seek immediate medical attention and show
safety data sheet.
Emergency measure - Skin: Wash affected areas with copious amounts of water and soap.
In case of persistent skin irritation, search medical
attention and show safety data sheet.
Emergency measure - Ingestion: If swallowed, do not induce vomiting, seek medical advice
immediately and show safety data sheet.
In case of accident or if you feel unwell, seek medical
advice immediately (show label/safety data sheet where
possible).
Fire-fighting measures
Recommended extinguishing agent: Compatible with all conventional extinguishing agents.
Product arising from burning: Carbon monoxide, carbon dioxide, nitrogen oxides.
Product determined by test: N
Protective equipment: Dispose fire residues and contaminated extinguishing agent
according to local official instructions.
Collect contaminated water for fire-fighting separately, do
not empty into drains.
Product arising from burning: Carbon monoxide, carbon dioxide, nitrogen oxides.
Product determined by test: N
Protective equipment: Dispose fire residues and contaminated extinguishing agent
according to local official instructions.
Collect contaminated water for fire-fighting separately, do
not empty into drains.
Accidental release measures
Emergency measures in case of spillage: Provide sufficient ventilation.
Wear the personal protection outfit (see 2.3.10).
Wear suitable respiratory equipment in case of exposure to
vapour/dust/aerosol.
Avoid the substance from getting into surface waters or the
canalisation.
In case of penetration in surface water, soil or
canalisation, notify responsible agency.
Absorb with liquid binding materials (e.g. sand, sawdust,
universal binding agent).
Handle absorbed material according to disposal management
indication.
The containers label in accordance with Technical Rule 201.
Wear the personal protection outfit (see 2.3.10).
Wear suitable respiratory equipment in case of exposure to
vapour/dust/aerosol.
Avoid the substance from getting into surface waters or the
canalisation.
In case of penetration in surface water, soil or
canalisation, notify responsible agency.
Absorb with liquid binding materials (e.g. sand, sawdust,
universal binding agent).
Handle absorbed material according to disposal management
indication.
The containers label in accordance with Technical Rule 201.
Handling and storage
Handling: All working methods must be designed so that exposure by
inhalation of the substance and by skin contact is minimized
and eye contact is excluded. All working methods must be
designed so that exposure by inhalation of the substance
and by skin contact is minimized and eye contact is
excluded. Closed or at least splashproof equipment should be
used during filling, transfer and metered feeding as well as
during sampling. In the case of handling in open systems,
any vapours that can form should be extracted directly at
the point of origin. If technical extraction or ventilation
measures are not possible or are insufficient, respiratory
protection (e.g. :::) should be worn. To avoid skin contact,
tested protective gloves (s. below) and suitable protective
clothing (s. below) should be worn. Safe eye protection
(s. below) is absolutely essential. Adequate washing
facilities should be available in the immediate vicinity of
the work area and eye douches should be made available and
their location indicated conspicuously.
Wash hands for breaks and at finishing time. Avoid contact
with skin and eyes.
Preventive skin-protection by applicating skin-protection
ointment.
Change contaminated clothing immediately.
Do not eat, drink or smoke in the working area.
Personal protective equipment:
- protective gloves (of nitrile or butyl rubber)
- tight-fitting safety goggles
- face protector
- disposal protective clothing.
Storage: For the storage the original packaging drums or other
unbreakable and correctly labelled containers are to be
used.
Keep container tightly closed and dry in a cool,
wellventilated place and secure by suitable measures against
falling down.
Keep away from food, drink and animal feedingstuffs.
Keep away from frost.
Keep away from heat and direct insolation.
Proetect against moisture and water.
Avoid product residues on the packing drums.
Packaging of the substance and or preparation: Lidded steal drum (180 kg)
inhalation of the substance and by skin contact is minimized
and eye contact is excluded. All working methods must be
designed so that exposure by inhalation of the substance
and by skin contact is minimized and eye contact is
excluded. Closed or at least splashproof equipment should be
used during filling, transfer and metered feeding as well as
during sampling. In the case of handling in open systems,
any vapours that can form should be extracted directly at
the point of origin. If technical extraction or ventilation
measures are not possible or are insufficient, respiratory
protection (e.g. :::) should be worn. To avoid skin contact,
tested protective gloves (s. below) and suitable protective
clothing (s. below) should be worn. Safe eye protection
(s. below) is absolutely essential. Adequate washing
facilities should be available in the immediate vicinity of
the work area and eye douches should be made available and
their location indicated conspicuously.
Wash hands for breaks and at finishing time. Avoid contact
with skin and eyes.
Preventive skin-protection by applicating skin-protection
ointment.
Change contaminated clothing immediately.
Do not eat, drink or smoke in the working area.
Personal protective equipment:
- protective gloves (of nitrile or butyl rubber)
- tight-fitting safety goggles
- face protector
- disposal protective clothing.
Storage: For the storage the original packaging drums or other
unbreakable and correctly labelled containers are to be
used.
Keep container tightly closed and dry in a cool,
wellventilated place and secure by suitable measures against
falling down.
Keep away from food, drink and animal feedingstuffs.
Keep away from frost.
Keep away from heat and direct insolation.
Proetect against moisture and water.
Avoid product residues on the packing drums.
Packaging of the substance and or preparation: Lidded steal drum (180 kg)
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: UN-Nr. 2735
Transport: ADR/RID, IMO/IMDG, IATA/ICAO
Class: 8
Packaging group: III
Class.code: C7
Hazard note: 8
For the internal transportation:
Use original containers or other unbreakable and correctly
labelled containers. Keep containers tightly closed and
secure by suitable measures against falling down.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: No danger known.
Chemical reaction with water: The substance is hydrolysed fast to 2,2-Dimethyl-3-
lauroyloxy-propanal and the corresponding amine.
Dust explosion: Substance is a liquid.
Dust explosion determined by test: N
Chemical reaction with water: The substance is hydrolysed fast to 2,2-Dimethyl-3-
lauroyloxy-propanal and the corresponding amine.
Dust explosion: Substance is a liquid.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Sika Härter LTJ is a reaction mixture (different
oligomeres)of the two substances 2,2-Dimethyl-3-lauroyloxy-
propanal (CAS No. 102985-93-3) and Polyetheramin T 403
(CAS No. 39423-51-3). During the hardening process Sika
Härter LTJ is hydrolysed to the aldehyde and amine. The
latter reacts and becomes chemically bound to the polymer
matrix, in which the aldehyde is integrated irreversibly.
Industry - Possibility of neutralisation: Acidification
Industry - Possibility of destruction: controlled discharge: Not known.
Industry - Possibility of destruction - incineration: Not known.
Industry - Possibility of destruction - water purification: Not known.
Industry - Possibility of destruction - other: Not known.
Public at large - Possibility of recovery/recycling: After use of the preparation the substance (and/or its
hydrolysis products: 2,2-Dimethyl-3-lauroyloxy-propanal and
the corresponding amine) is integrated irreversibly in the
matrix of the hardened adhesive.
Public at large - Possibility of neutralisation: Not known.
Public at large - Possibility of destruction: controlled discharge: Not known.
Public at large - Possibility of destruction - incineration: Not known.
Public at large - Possibility of destruction - water purification: Not known.
Public at large - Possibility of destruction - others: Not known.
oligomeres)of the two substances 2,2-Dimethyl-3-lauroyloxy-
propanal (CAS No. 102985-93-3) and Polyetheramin T 403
(CAS No. 39423-51-3). During the hardening process Sika
Härter LTJ is hydrolysed to the aldehyde and amine. The
latter reacts and becomes chemically bound to the polymer
matrix, in which the aldehyde is integrated irreversibly.
Industry - Possibility of neutralisation: Acidification
Industry - Possibility of destruction: controlled discharge: Not known.
Industry - Possibility of destruction - incineration: Not known.
Industry - Possibility of destruction - water purification: Not known.
Industry - Possibility of destruction - other: Not known.
Public at large - Possibility of recovery/recycling: After use of the preparation the substance (and/or its
hydrolysis products: 2,2-Dimethyl-3-lauroyloxy-propanal and
the corresponding amine) is integrated irreversibly in the
matrix of the hardened adhesive.
Public at large - Possibility of neutralisation: Not known.
Public at large - Possibility of destruction: controlled discharge: Not known.
Public at large - Possibility of destruction - incineration: Not known.
Public at large - Possibility of destruction - water purification: Not known.
Public at large - Possibility of destruction - others: Not known.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
