Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air and seek immediate medical attention.
Emergency measure - Eyes: Flush eyes with copious amounts of water for at least 15
minutes. Seek medical attention.
Emergency measure - Skin: Wash affected area with soap or mild detergent under running
water. Remove any contaminated clothing or shoes. Seek
medical attention.
Emergency measure - Ingestion: Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, dry chemical or carbon dioxide extinguishers
may be used.

Product arising from burning: The substance is combustible and will burn if involved in a
fire. Products of combustion may contain noxious fumes (eg
carbon and nitrogen oxides and fluorine-containing
compounds).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.


Avoid dust formation by damping down with water. Absorb
spillages of solutions with a suitable inert material (eg
sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original containers.


Clean the spillage area with water and detergent.


Dispose of waste material by incineration in accordance with
local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166


When necessary appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP1.


The standards mentioned above should be regarded as a
minimum.

Storage: Store in a cool, dry, well-ventilated area, out of direct
sunlight.


Keep containers tightly closed when not in use. Always keep
drums in an upright position.

Packaging of the substance and or preparation: 200 l polyethylene-lined steel drum.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported

Chemical reaction with water: None which is hazardous

Dust explosion: There is a potential dust explosion hazard from this organic
powder.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be disposed of by incineration. In principle,
it may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is
considered hazardous to health based on its sensitising
properties. The substance is not classified as dangerous
for the environment.


No chemical treatment is practicable to neutralise the
hazardous health properties.


The dust hazard will be minimised by appropriate storage and
handling techniques.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
must be scrubbed, because noxious fumes (eg carbon and
nitrogen oxides and fluorine-containing compounds) could be
formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: The substance will not enter the public domain.