Registration Dossier

Administrative data

First-aid measures

Inhalation: Immediately move to fresh air. Consult a physician if irritating symptoms develop and persist.
Skin Contact: Remove contaminated clothing. Rinse contaminated skin immediately with plenty of water and soap and seek medical advice.
If skin irritation persists, call a physician.
Eye Contact: Immediately rinse eyes thoroughly with running water as long as possible (approx. 15 min). Take injured quickly to factory medical
center or call an ambulance (code word: eye accident). If eye irritation persists, consult a specialist.
Ingestion: Only as long as the patient is fully conscious: wash mouth and have the victim drink copious amounts of water (often vomiting will be induced). Consult a physician immediately or call for an ambulance and show label.

Notes to Physician: General measures to eliminate the substance and to reduce absorption. Apply general supportive and symptomatic treatment.

Fire-fighting measures

Suitable Extinguishing Media: Water spray or fog, foam, dry chemical powder, CO2, dry sand
Unsuitable Extinguishing Media: High volume water jet
Protective equipment for firefighters: Wear self-contained breathing apparatus and fire protective suite.

Accidental release measures

Personal precautions: Wear chemical resistant protective suite. Minimize number of personnel in risk area. Keep away unprotected persons. Wear
chemical-proof clothes and masks while undressing contaminated persons or cleaning contaminated equipment.
Environmental precautions: Firefighting water may not spill into open rivers and ponds. Collect spilled material by all available means. Do not release into the environment.
Methods for cleaning: Moisten spilled material with water (in order to avoid dust formation), cover with wet sand or wetted binder, then take up.
Wash away remains with plenty of water. Put into lead-sealable and labelled drums.

Handling and storage

Storage and Handling Precautions: Handle in closed system. Provide exhaust ventilation system in case of open handling of small quantities.
Open handling without suitable personal protective equipment must be avoided. Avoid formation of dust.
Technical Measures: Preferably handle in closed system.
Preventive Precautions (fire/explosion): Observe the usual precautionary measures required for chemicals with dust explosive properties
(Observe national regulations).

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Open Handling
Respiration: Full face mask (EN136)
Filter: P3 (EN143)
Eye: Yes, by face mask
Hand: Normal length chemical-mechanical-resistant gloves (EN374/EN388) worn over disposable gloves
Additional protection: Disposable dust-proof suit (EN465, type 4) worn over long underwear. Disposable boot covers, conductive

Stability and reactivity

50 % (Aqueous buffer pH = 4: 25 °C) > 1 years ( EEC Directive 92/69 C.7)
50 % (Aqueous buffer pH = 7: 25 °C) 6185 hours (EEC Directive 92/69 C.7)
50 % (Aqueous buffer pH = 9: 25 °C) 172 hours (EEC Directive 92/69 C.7)

Disposal considerations

Disposal Requirements: Incineration in an approved, controlled furnace with combustion gas scrubbing and emission gas control.
Container Disposal: For disposal local regulation is binding.