Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Boiling point

Currently viewing:

Administrative data

Link to relevant study record(s)

Description of key information

Two experiments were conducted using the dynamic method.
No boiling point could be determined because decomposition of the test item taking place
at sample temperatures of approx. 190 to 194 °C.
Decomposition was indicated by formation of a slightly yellowish condensate at these temperatures,
while the temperature measured at the pumping Cottrell pump was 171.3 resp.
175.3 °C.

Key value for chemical safety assessment

Additional information

This study was performed in order to determine the boiling point of Tar wood. The boiling

point is one of the fundamental physico-chemical properties of a chemical substance. The

test item was heated until boiling/decomposition of the test item could be observed. All

observations (e.g. changes of the physical state) were documented as well.

No boiling point of the test item Tar wood could be determined using the dynamic method.

As the colour of the test item was too dark, the Siwoloboff method was not applicable.

Boiling was observed, indicated by pumping of the Cottrell pump, but the thermometer in

the Cottrell pump showed a much lower temperature than the temperature of the sample.

If a liquid boils, the measured temperatures of the thermometers should be similar. Therefore,

the temperature difference between the thermometers is a sign of decomposition.

The observed slightly yellowish condensate in the cooler during heating and the different

odour are additional signs of decomposition of the test item.

Therefore, no boiling point of the test item Tar wood could be determined because of decomposition

of the test item at approx. 171 to 175 °C.

No observations were made which might cause doubts on the validity of the study outcome.

Therefore, the result of the study is considered valid.