Registration Dossier

Environmental fate & pathways

Additional information on environmental fate and behaviour

Administrative data

Endpoint:
additional information on environmental fate and behaviour
Remarks:
Dispersion stability in simulated environmental media
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2020
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2020
Report Date:
2020

Materials and methods

Test guideline
Qualifier:
according to
Guideline:
other: OECD 318
GLP compliance:
no

Test material

Reference
Name:
Unnamed
Type:
Constituent

Results and discussion

Any other information on results incl. tables

At any of the time points mentioned in the TG-318, the influence of Ca is critical. Regardless of pH, the pigment is categorized at the 24h-sampling time as “unstable” in 10 mM Ca, representing high water hardness.

After 6h, regardless of pH, the samples showed high dispersion stability in 0 an 1 mM Ca.

After 24 hours the stability for these samples became intermediate. For the samples in 10 mM the stability was low.

Table 1: full results of the dispersion stability in the presence of NOM

Ca(NO3)2

Stability after 6h

Standard deviation

Stability after 15h

Standard deviation

Stability after 24h

Standard deviation

[mM]

[%]

[%]

[%]

[%]

[%]

[%]

 

 

 

 

pH 4

0

93.2

0.3

81.0

2.6

73.5

3.0

pH 4

1

94.2

0.5

84.5

2.2

73.0

4.5

pH 4

10

11.9

3.0

4.5

1.2

2.8

1.2

.

 

 

 

 

 

 

pH 7

0

95.0

1.8

88.3

4.5

80.2

4.7

pH 7

1

95.9

1.9

88.8

4.4

72.3

7.4

pH 7

10

8.6

0.4

3.4

0.2

2.3

0.1

.

 

 

 

 

 

 

pH 9

0

93.3

1.0

86.8

1.7

81.6

0.9

pH 9

1

97.8

1.5

89.7

3.8

66.3

4.5

pH 9

10

10.5

0.5

4.5

0.4

3.1

0.3

To rationalize the observed dispersion stability, we finally checked the particle size distribution directly in the environmental medium (exact same sample preparation as for the UV/VIS measurements). We applied the NanoDefine method of Analytical Ultracentrifugation.

The observed size distributions confirm the moderate agglomeration at 1 mM Ca, pH7, with NOM. If the particles would have been significantly dissolved, no size distribution would be observable at all by this method, which relies on the detection of the movement of particles during centrifugal separation.

Additionally, the centrifugation methods include a determination of the remaining absorption after centrifugation, fully consistent with the conventional determination of the dissolved fraction after centrifugation as recommended by the TG-318. The remaining absorption was measured at c.a 0.05. This is a fraction of 3.5% of the initial absorption, but actually is close to the LOD of the built-in UV/Vis detector. Considering the LOD, between 0% and 3.5% of the sample may have been dissolved.

 

All evidence combined, the results after centrifugation confirm that at least 96.5% of the observed dispersion stability has to be attributed to the particles, not to dissolution.

Applicant's summary and conclusion

Executive summary:

Elevated apparent dispersion stability may originate from dissolution. The dissolution in environmental media has not yet been assessed, but the particle size distribution was measured in all media. The remaining absorption after centrifugal separation of particles was determined to be not more than 3.6% of the total signal. Thus, dissolution is not the main cause of the observed stability.

 

Taken together, the dispersion stability of Pigment Yellow 95 depends especially on water hardness. Regardless of pH, the stability in 0 and 1 mM Ca is high, in 10 mM Ca the stability is low.