Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General information: Remove/Take off immediately all contaminated clothing.
After Inhalation: remove victim to fresh air and seek medical advice If unconscious place in recovery position and seek medical advice. Remove casualty to fresh air and keep warm and at rest.
following skin contact: Rinse skin with water/shower and soap. Get medical advice/attention.
After Eye contact: In case of contact with eyes flush immediately with plenty of flowing water for several minutes holding eyelids apart and consult an ophthalmologist.
In case of ingestion: Rinse mouth immediately and drink plenty of water. Do not induce vomiting, seek medical advice immediately.
Information to physician:
Most important symptoms and effects, both acute and delayed: skin, eyes and respiratory tract corrosion/irritation
Nausea
Allergic reactions
Indication of any immediate medical attention and special treatment needed: treatment of symptoms

Fire-fighting measures

Extinguishing Media: CO2, Extinguishing powder or water spray jet. Use water spray jet or alcoholresistent foam for extinction.
Extinguishing media which must not be used for safety reasons: water spray jet
Special hazards arising from the substance or mixture: liberates toxic gases, if heated or in case of fire.
In case of fire can be liberated: Nitrogen oxides (NOx), Carbon monoxide (CO), Gases/vapours, irritant.
Advice for firefighters:
Special protective equipment for firefighters: Wear self-contained breathing apparatus. Do not inhale explosion and combustion gases.
Additional information:
Cool endangered containers. with water spray jet. Dispose contaminated remnants of fire and fire extinguishing water according to legislation.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Provide adequate ventilation. Use personal protection equipment.
Environmental precautions: Dilute with plenty of water. Do not allow to enter into surface water or drains.
Methods and material for containment and cleaning up: Absorb with liquid-binding material ( e.g. sand, diatomaceous earth, acid- or universal binding agents). Collect in closed and suitable containers for disposal. Provide adequate ventilation.

Handling and storage

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site. Written confirmation of application of Strictly Controlled Conditions has been received from affected Distributor and Downstream Manufacturer/User of the Registrant's intermediate.

Handling:
Precautions for safe handling: Avoid formation of aerosol. Use only in well-ventilated areas. Store in tightly closed containers a cool dry place..
Precautions against fire and explosion: No special measures are necessary.
Requirements for storage rooms and vessels Requirements for storage rooms and vessels
Storage:
Conditions for safe storage, including any incompatibilities: No Specific requirements
Hints on joint storage: Keep away from oxidizers.
Further information on storage conditions:
Store in safely closed containers cool and dry. Keep cool. Protect from sunlight.. Keep away from light influence. Keep away from frost.
Specific end use(s): No information available.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
If bulk delivery protection against cold < -5°C

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates. Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each Manufacturing site. Written confirmation of application of Strictly Controlled Conditions has been received from affected Distributor and Downstream Manufacturer/User of the Registrant's intermediate.

Personal protection equipment:
General health and safety measures:
Observe standard precautions for handling of chemical.s Keep away from food, drink and animal feeding stuffs. When using do not eat, drink, smoke or sniff. Do not breathe gas/fumes/vapour/spray. Remove contaminated, saturated clothing immediately. Wash hands before breaks and after work. Avoid contact with skin and eyes.
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment.
Hand protection: gloves.
Eye protection: Wear closely fitting protective glasses
protective clothing: protective clothing

Stability and reactivity

Reactivity:
Chemical stability:
Thermal decomposition / Conditions to avoid: No decomposition at intended use
Possible hazard reactions: Reactions with strong oxidising agents
Conditions to avoid: The substance is light-sensitive and keep away from lightIncompatible materials: Strong oxidation agents
Hazardous decomposition products: Hazard of formation of toxic pyrolyse products, carbon monoxide, nitrogen oxides (NOx)

Disposal considerations

Recommendation:
Do not dispose with domestic waste. Do not empty into drains. Dispose of waste according to applicable legislation under special conditions.