Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Inhalation
If adverse effects occur, remove to uncontaminated area. Give artificial respiration if not breathing. Get immediate medical attention.

Skin
Wash skin with soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention, if needed. Thoroughly clean and dry contaminated clothing and shoes before reuse.

Eyes
Flush eyes with plenty of water for at least 15 minutes. Then get immediate medical attention.

Ingestion
Contact local poison control center or physician immediately. Never make an unconscious person vomit or drink fluids. When vomiting occurs, keep head lower than hips to help prevent aspiration. If person is unconscious, turn head to side. Get medical attention immediately.


Note to Physicians
For ingestion, consider gastric lavage and activated charcoal slurry.
Antidote
methylene blue, intravenous; ascorbic acid, intravenous.

Fire-fighting measures

NFPA Ratings:
Health: 2 Fire: 1 Reactivity: 0
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe
Flammable Properties
Slight fire hazard.

Extinguishing Media
regular dry chemical, regular foam, water, alcohol-resistant foam

Large fires: Use regular foam or flood with fine water spray.

Fire Fighting Measures
Move container from fire area if it can be done without risk. Fight large fires from a protected location or safe distance. Stay away from the ends of tanks. Dike for later disposal. Do not scatter spilled material with high-pressure water streams. Do not attempt to extinguish fire unless flow of material can be stopped first. Use extinguishing agents appropriate for surrounding fire. Flood with fine water spray. Cool containers with water spray until well after the fire is out. Apply water from a protected location or from a safe distance. Avoid inhalation of material or combustion by-products. Stay upwind and keep out of low areas. Consider downwind evacuation if material is leaking. Water or foam may cause frothing.

Accidental release measures

Water Release
Subject to California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65). Keep out of water supplies and sewers.

Occupational spill/release
Do not touch spilled material. Stop leak if possible without personal risk. Reduce vapors with water spray. Small spills: Absorb with sand or other non-combustible material. Collect spilled material in appropriate container for disposal. Small dry spills: Move containers away from spill to a safe area. Large spills: Dike for later disposal. Keep unnecessary people away, isolate hazard area and deny entry. Ventilate closed spaces before entering. Notify Local Emergency Planning Committee and State Emergency Response Commission for release greater than or equal to RQ (U.S. SARA Section 304). If release occurs in the U.S. and is reportable under CERCLA Section 103, notify the National Response Center at (800)424-8802 (USA) or (202)426-2675 (USA).

Handling and storage

Storage Procedures
Store and handle in accordance with all current regulations and standards. Store in a cool, dry place. Store under an inert atmosphere. Store in a tightly closed container. Avoid contact with air or light. Keep separated from incompatible substances.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN2431
Shipping information
Proper shipping name and description:
Anisidines, liquid
Chemical name:
O-ANISIDINE
Language:
English
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN2431
Shippingopen allclose all
Labels:
Required Label(s): 6.1
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN2431
Shipping information
Proper shipping name and description:
Anisidines, liquid
Chemical name:
O-ANISIDINE
Labels:
Required Label(s): 6.1
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shipping information
Proper shipping name and description:
Shipping Name: Anisidines
Chemical name:
O-ANISIDINE
Labels:
Required Label(s): 6.1
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Component Exposure Limits
O-ANISIDINE (90-04-0) ACGIH: 0.5 mg/m3 TWA
Skin - potential significant contribution to overall exposure by the cutaneous route
NIOSH: 0.5 mg/m3 TWA
Potential for dermal absorption
50 mg/m3 IDLH
Mexico: 0.1 ppm TWA; 0.5 mg/m3 TWA
Skin - potential for cutaneous absorption

Exposure Limits for Chemicals which may be generated during processing
This material has no components listed.

Ventilation
Provide local exhaust or process enclosure ventilation system. Ensure compliance with applicable exposure limits.

PERSONAL PROTECTIVE EQUIPMENT
Eyes/Face
Wear splash resistant safety goggles with a faceshield. Provide an emergency eye wash fountain and quick drench shower in the immediate work area.

Protective Clothing
Wear appropriate chemical resistant clothing.

Glove Recommendations
Wear appropriate chemical resistant gloves.

Respiratory Protection
The following respirators and maximum use concentrations are drawn from NIOSH and/or OSHA.
At any detectable concentration -
Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode.
Any supplied-air respirator with a full facepiece that is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained breathing apparatus operated in pressure-demand or other positive-pressure mode.
Escape -
Any air-purifying full-facepiece respirator (gas mask) with a chin-style, front-mounted or back-mounted organic vapor canister.
Any appropriate escape-type, self-contained breathing apparatus.
For Unknown Concentrations or Immediately Dangerous to Life or Health -
Any supplied-air respirator with a full facepiece that is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained breathing apparatus operated in pressure-demand or other positive-pressure mode.
Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode.

Stability and reactivity

Chemical Stability
May decompose with evolution of heat above 190 C. Releases toxic, corrosive, flammable or explosive gases.

Conditions to Avoid
Avoid heat, flames, sparks and other sources of ignition. Containers may rupture or explode if exposed to heat.

Incompatible Materials
acids, oxidizing materials, combustible materials

O-ANISIDINE:
ACIDS: Reacts vigorously.
COATINGS: Attacks.
OXIDIZERS (STRONG): Fire and explosion hazard.
PLASTICS: Attacks.
RUBBER: Attacks.

Hazardous Decomposition Products
oxides of carbon, nitrogen



Thermal decomposition products: oxides of carbon, nitrogen. test

Possibility of Hazardous Reactions
Will not polymerize.

Disposal considerations

Disposal Methods
Dispose in accordance with all applicable regulations.

Component Waste Numbers
The U.S. EPA has not published waste numbers for this product's components.