Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Protection of First-Aiders:
Protect yourself and any casualty from further exposure during decontamination. Wear suitable protective clothing, gloves and eye/face protection.

Other:
Remove contaminated clothing.

Inhalation
Remove patient from exposure, keep warm and at rest. Apply artificial respiration if necessary. Treat symptomatically. Seek medical treatment.

Skin Contact
Wash affected skin with plenty of water. Treat symptomatically. Seek medical treatment.

Eye Contact
Irrigate with eyewash solution or clean water, holding the eyelids apart, for at least 15 minutes. Seek medical treatment.

Ingestion
If swallowed, rinse mouth with water (only if the person is conscious). Do not induce vomiting. Keep patient at rest. Seek medical treatment.

Most important symptoms and effects, both acute and delayed
May cause respiratory irritation.
May cause an allergic skin reaction.

Indication of immediate medical attention and special treatment needed
Seek medical treatment when anyone has symptoms apparently due to swallowing, inhalation or contact with skin or eyes.

Fire-fighting measures

Suitable Extinguishing Media
Extinguish with dry chemical, foam or waterspray.

Unsuitable Extinguishing Media
None known.

Special hazards arising from the substance or mixture
Decomposes in a fire giving off toxic fumes:

Advice for fire-fighters
A self contained breathing apparatus and suitable protective clothing should be worn in fire conditions.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Ensure suitable personal protection (including respiratory protection) during removal of spillages.

Environmental precautions
Avoid release to the environment.

Methods and material for containment and cleaning up
Absorb with inert liquid-binding material, E.g. Sand and vermiculite. Sweep substance into clean dry container. Transfer to a container for disposal. Wash the spillage area with water.

Additional Information
Washings must be prevented from entering surface water drains. Avoid release to the environment.

Handling and storage

Precautions for safe handling
Wear suitable protective clothing. Use only in well-ventilated areas. Avoid inhalation of dusts. Avoid contact with skin and eyes.

Conditions for safe storage, including any incompatibilities
Keep container tightly closed, in a cool, well ventilated place. Keep container dry.

Storage Temperature
Keep in a cool place.

Incompatible materials
Keep away from: Strong oxidising agents, Alkalis.

Specific end use(s)
Industrial use only.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Substance is used as an on-site isolated intermediate.

Exposure controls / personal protection

1. Technical protection measures
Provide adequate ventilation when using the material and follow the principles of good occupational hygiene to control personal exposures.

2. Organisational protection measures
The manufacturing site has a documented accredited Quality, Environment and Safety System.

3. Hand protection
Neoprene gloves

4. Feet protection
Safety boots

5. Body protection
Wear suitable protective clothing. Impervious gloves and boots.

6. Eye protection
Goggles / face shield.

7. Respiratory protection
Where engineering controls are not fitted or inadequate wear suitable respiratory protective equipment. E.g EN141 Type A

Stability and reactivity

Stable under normal conditions.

Conditions to avoid
Keep away from heat and sources of ignition.

Incompatible materials
Do not mix with strong oxidizing agents, reducing agents or strong acids.

Hazardous Decomposition Product(s)
Toxic gases/vapours.

Disposal considerations

Waste treatment methods
Dispose of this material and its container to hazardous or special waste collection point. Disposal may be carried out by diluting the waste with a suitable solvent and burning under controlled conditions at a licensed waste material processor; stack gases will need to be scrubbed (See Section 5 above).

Additional Information
Disposal should be in accordance with local, state or national legislation.