Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 940-206-6 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
General advice: If you feel unwell, seek medical advice (show the label where possible).
If inhaled: remove from exposure, lie down. If breathing is irregular or stopped, administer artificial respiration. Monitor breathing, give oxygen if necessary. Consult a physician.
In case of skin contact: wash off immediately with plenty of water. Consult a physician if necessary.
In case of eye contact: rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed: never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a physician immediately.
If inhaled: remove from exposure, lie down. If breathing is irregular or stopped, administer artificial respiration. Monitor breathing, give oxygen if necessary. Consult a physician.
In case of skin contact: wash off immediately with plenty of water. Consult a physician if necessary.
In case of eye contact: rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed: never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a physician immediately.
Fire-fighting measures
Suitable extinguishing media: Water spray, Dry powder, Foam, Carbon dioxide (CO2)
Specific hazards during firefighting: dangerous gases or fumes may occur in case of fire.
Special protective equipment for firefighters: wear self contained breathing apparatus for fire fighting if necessary.
Specific hazards during firefighting: dangerous gases or fumes may occur in case of fire.
Special protective equipment for firefighters: wear self contained breathing apparatus for fire fighting if necessary.
Accidental release measures
Personal precautions: Use personal protective equipment.
Environmental precautions: Avoid subsoil penetration.Do not flush into surface water or sanitary sewer system.
Methods for cleaning up:Use mechanical handling equipment. The material taken up must be disposed of in accordance with regulations.
Environmental precautions: Avoid subsoil penetration.Do not flush into surface water or sanitary sewer system.
Methods for cleaning up:Use mechanical handling equipment. The material taken up must be disposed of in accordance with regulations.
Handling and storage
Advice on safe handling: Wear personal protective equipment. Avoid contact with skin and eyes.
Advice on protection against fire and explosion: Provide sufficient air exchange and/or exhaust in work rooms. Do not spray on a naked flame or any incandescent material.
Fire-fighting class B: Fires involving liquids or liquid containing substances. Also includes substances which become liquid at elevated temperatures.
Requirements for storage areas and containers: Keep tightly closed in a dry and cool place.
Storage class (TRGS 510): 10-13: German Storage Class 10 to 13
Other data: Stable at normal ambient temperature and pressure.
Advice on protection against fire and explosion: Provide sufficient air exchange and/or exhaust in work rooms. Do not spray on a naked flame or any incandescent material.
Fire-fighting class B: Fires involving liquids or liquid containing substances. Also includes substances which become liquid at elevated temperatures.
Requirements for storage areas and containers: Keep tightly closed in a dry and cool place.
Storage class (TRGS 510): 10-13: German Storage Class 10 to 13
Other data: Stable at normal ambient temperature and pressure.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not dangerous good
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not dangerous good
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not dangerous good
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not dangerous good
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Respiratory protection: In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where dust, fibres and smoke occur, use self-contained breathing apparatus or breathing apparatus with a type P2 or P3 filter, in compliance with EN 143. No personal respiratory protective equipment normally required.
Hand protection: The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other., Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time., Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature).
gloves suitable for permanent contact:
Material: butyl-rubber
Break through time: >= 480 min
Material thickness: >= 0.7 mm
gloves suitable for splash protection:
Material: Nitrile rubber/nitrile latex
Break through time: >= 30 min
Material thickness: >= 0.4 mm
Eye protection: Tightly fitting safety goggles, Safety glasses with side-shields
Skin and body protection: Protective suit
Hygiene measures: Avoid contact with eyes. General industrial hygiene practice. Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feedingstuffs. When using, do not eat, drink or smoke.
Protective measures: Avoid contact with eyes. Wear suitable gloves and eye/face protection.
Hand protection: The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other., Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time., Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature).
gloves suitable for permanent contact:
Material: butyl-rubber
Break through time: >= 480 min
Material thickness: >= 0.7 mm
gloves suitable for splash protection:
Material: Nitrile rubber/nitrile latex
Break through time: >= 30 min
Material thickness: >= 0.4 mm
Eye protection: Tightly fitting safety goggles, Safety glasses with side-shields
Skin and body protection: Protective suit
Hygiene measures: Avoid contact with eyes. General industrial hygiene practice. Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feedingstuffs. When using, do not eat, drink or smoke.
Protective measures: Avoid contact with eyes. Wear suitable gloves and eye/face protection.
Stability and reactivity
Reactivity:
Stable at normal ambient temperature and pressure.
Chemical stability:
No decomposition if stored and applied as directed.
Possibility of hazardous reactions:
Hazardous reactions: None known.
Conditions to avoid:
Direct heating, dirt, chemical contamination, sunlight, UV or ionising radiation.
Incompatible materials to avoid:
strong acids and oxidizing agents;
Hazardous decomposition products:
No decomposition if stored normally.
Thermal decomposition:
Hazardous decomposition products formed under fire conditions.
Stable at normal ambient temperature and pressure.
Chemical stability:
No decomposition if stored and applied as directed.
Possibility of hazardous reactions:
Hazardous reactions: None known.
Conditions to avoid:
Direct heating, dirt, chemical contamination, sunlight, UV or ionising radiation.
Incompatible materials to avoid:
strong acids and oxidizing agents;
Hazardous decomposition products:
No decomposition if stored normally.
Thermal decomposition:
Hazardous decomposition products formed under fire conditions.
Disposal considerations
Product can be incinerated, when in compliance with local regulations.
waste code of the European Union: EWC .
The waste code must be determined in agreement with the regional waste disposal authority or company. A waste code in accordance with the European Waste Catalogue (EWC) may not be assigned to this product since it admits of a classification only when the consumer uses it for some purpose.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
