Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-579-6 | CAS number: -
Flammability
Administrative data
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2008
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- study well documented, meets generally accepted scientific principles, acceptable for assessment
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 008
- Report date:
- 2008
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- no
Test material
- Reference substance name:
- tetrakis(4-{[4-(diethylamino)phenyl][4-(ethylamino)naphthalen-1-yl]methylidene}-N,N-diethylcyclohexa-2,5-dien-1-iminium) 2-(dodecan-5-yl)-4-(4-sulfonatophenoxy)benzene-1-sulfonate 2-(dodecan-5-yl)-4-[3-(dodecan-5-yl)-4-sulfonatophenoxy]benzene-1-sulfonate
- EC Number:
- 700-579-6
- Molecular formula:
- C90H114O7S2N6 (MW = 1454) and C102H138O7S2N6 (MW = 1622)
- IUPAC Name:
- tetrakis(4-{[4-(diethylamino)phenyl][4-(ethylamino)naphthalen-1-yl]methylidene}-N,N-diethylcyclohexa-2,5-dien-1-iminium) 2-(dodecan-5-yl)-4-(4-sulfonatophenoxy)benzene-1-sulfonate 2-(dodecan-5-yl)-4-[3-(dodecan-5-yl)-4-sulfonatophenoxy]benzene-1-sulfonate
- Test material form:
- solid: particulate/powder
Constituent 1
- Specific details on test material used for the study:
- - Batch N° 602715
Results and discussion
Flammable solids
- Key result
- Test procedure:
- burning rate test: preliminary screening test
- Burning time:
- ca. 1 590 s
- Remarks on result:
- other: buring time to burn 200 mm
Any other information on results incl. tables
Burning was slow and constant throughout the entire section.
Applicant's summary and conclusion
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- Under the experimental conditions during a preliminary test, the burning time was measured as higher than 4 minutes. As a result, SEPISOL FAST BLUE is not considered as a flammable solid.
- Executive summary:
A test to determine if Sepisol Fast Blue 85219 is a flammable solid was carried out by following the EU method A.10.
The test material is formed into an unbroken strip or powder strain about 250 mm long by 20 mm wide by 10 mm high on a non-combustible, non-porous and low heat -conducting base plate. A hot flame from a gas burner is applied to one end of the powder strain until the powder ignites for a maximum of 2 minutes.
During the preliminary assay, the burning time was measured to be 1590 seconds. Burning was slow and constant throughout the entire section.
Since this burning time was greater than 4 minutes, no further test was carried out.
It has been concluded that Sepisol Fast Blue 85219 was not a flammable solid.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
