Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Skin contact:
Remove contaminated clothing. Wash thoroughly with soap and water. Seek medical attention if irritation persists and present this material safety data sheet.

Eye contact:
Immediately flush with flowing water for at least 15 minutes, holding the eyelid open (protect non-affected eye, remove contact lenses). If eye
irritation persists, seek eye specialist advice and present this material safety data sheet.

Ingestion:
Immediately rinse mouth with large amounts water. Do not induce vomiting. Seek medical attention and present this material safety data
sheet.

Inhalation:
Remove to fresh air. Immobilise. Seek medical attention if difficulties persist and present this material safety data sheet.

Fire-fighting measures

Cordon off affected area in wind direction. Remove uninvolved persons.
Appropriate extinguishing agents: Water-spray jet, carbon dioxide (CO2), dry extinguishing agents.
Inappropriate extinguishing agents: Full water jet
Wear self-contained breathing apparatus and chemical protection suit during fire fighting.
Fire water must not spill into soil, sewerage systems and surface waters.
Toxic decomposition products may be caused by fire: Carbon oxides, nitrogen oxides

Accidental release measures

Wear personal protection equipment (see clause 8).
Ensure sufficient ventilation/extraction.
Avoid formation of dust.
Do not inhale dust.
Avoid contact with skin, eyes and clothing.
Take up spilled product with mechanical means and store in closed, properly labelled containers. Disposal according to clause 13.
Product must not spill into soil, sewerage systems and surface waters.

Handling and storage

Handling:
Wear personal protection equipment (see clause 8). Ensure sufficient ventilation/extraction.
Avoid formation of dust. Do not inhale dust. Avoid contact with skin, eyes and clothing.
When using, do not eat, drink, or smoke. Wash hands after use.

Storage:
Storage in tightly closed original containers in a dry, cool and well-ventilated place. Do not expose to direct sunlight and moisture.
Keep away from food, beverages and feedstuffs.
Keep out of reach of children.
Storage class (VCI): 11 – flammable solid materials

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not classified
Shippingopen allclose all
Labels:
not classified
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not classified
Shippingopen allclose all
Labels:
not classified
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not classified
Shipping information
Proper shipping name and description:
not classified
Chemical name:
not classified
Labels:
not classified
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not classified
Shipping information
Proper shipping name and description:
not classified
Labels:
not classified
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure limits at workplaces: not determined

Hand protection:
Chemicals resistant protection gloves acc. to DIN EN 374-3, recommended materials: Nitrile, Butyl. The penetration time of both materials is >480 minutes. This value is for orientation only. There are no data available for the product. Please, contact glove vendor for further information.
Inhalation protection: In case of dust formation or insufficient extraction – wear dust mask or, if need be, mask with particle filter P2

Eye protection:
Tight-sealing protection goggles

Body protection:
Suitable protection clothing

Stability and reactivity

Stable under storage conditions set out in storage conditions.
Hazardous decomposition/combustion products: Nitrogen oxides, carbon oxide

Disposal considerations

Dispose product residues and non-cleanable packaging to a controlled incinerator
facility in compliance with official national and local regulations.