Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures
Inhalation:Move exposed person to fresh air. Keep person warm and at rest. If
not breathing, if breathing is irregular or if respiratory arrest occurs,
provide artificial respiration or oxygen by trained personnel. It may
be dangerous to the person providing aid to give mouth-to-mouth
resuscitation. Get medical attention if adverse health effects persist
or are severe. If unconscious, place in recovery position and get
medical attention immediately. Maintain an open airway. Loosen
tight clothing such as a collar, tie, belt or waistband. In case of
inhalation of decomposition products in a fire, symptoms may be
delayed. The exposed person may need to be kept under medical
surveillance for 48 hours.
Ingestion : Wash out mouth with water. Move exposed person to fresh air.
Keep person warm and at rest. If material has been swallowed and
the exposed person is conscious, give small quantities of water to
drink. Stop if the exposed person feels sick as vomiting may be
dangerous. Do not induce vomiting unless directed to do so by
medical personnel. If vomiting occurs, the head should be kept low
so that vomit does not enter the lungs. Get medical attention. Never
give anything by mouth to an unconscious person. If unconscious,
place in recovery position and get medical attention immediately.
Maintain an open airway. Loosen tight clothing such as a collar, tie,
belt or waistband.
Skin contact : Flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur. Wash
clothing before reuse. Clean shoes thoroughly before reuse.
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the
upper and lower eyelids. Check for and remove any contact lenses.
Continue to rinse for at least 10 minutes. Get medical attention if
irritation occurs.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: In case of fire, use water spray (fog), foam, dry chemical or CO2.
Unsuitable extinguishing media: None known.
Special hazards arising from the substance or mixture
Hazards from the substance or mixture: No specific fire or explosion hazard.
Hazardous combustion products: Decomposition products may include the following materials:
carbon oxides,nitrogen oxides
Advice for firefighters
Special precautions for firefighters:Promptly isolate the scene by removing all persons from the vicinity
of the incident if there is a fire. No action shall be taken involving any
personal risk or without suitable training. This material is harmful to
aquatic organisms. Fire water contaminated with this material must
be contained and prevented from being discharged to any waterway,
sewer or drain.
Special protective equipment for fire-fighters
Fire-fighters should wear appropriate protective equipment and selfcontained
breathing apparatus (SCBA) with a full face-piece
operated in positive pressure mode.



Accidental release measures

Personal precautions,protective equipment and emergency procedures
No action shall be taken involving any personal risk or without
suitable training. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Provide
adequate ventilation. Put on appropriate personal protective
equipment .
Environmental precautions
Avoid dispersal of spilt material and runoff and contact with soil,
waterways, drains and sewers. Inform the relevant authorities if the
product has caused environmental pollution (sewers, waterways, soil
or air). Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Methods and materials for containment and cleaning up
Small spill : Move containers from spill area. Vacuum or sweep up material and
place in a designated, labelled waste container. Dispose of via a
licensed waste disposal contractor.
Large spill : Move containers from spill area. Prevent entry into sewers, water
courses, basements or confined areas. Vacuum or sweep up
material and place in a designated, labelled waste container.
Dispose of via a licensed waste disposal contractor.

Handling and storage

Precautions for safe handling
: Put on appropriate personal protective equipment (see Section 8).
Eating, drinking and smoking should be prohibited in areas where this
material is handled, stored and processed. Workers should wash
hands and face before eating, drinking and smoking. Do not ingest.
Avoid contact with eyes, skin and clothing. Keep in the original
container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain
product residue and can be hazardous.
Conditions for safe storage, including any incompatibilities
: Do not store above the following temperature: 50°C (122°F). Store in
accordance with local regulations. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials (see section 10) and food and
drink. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabelled
containers. Use appropriate containment to avoid environmental
contamination.

Remarks : Vent waste air only via suitable separators or scrubbers. Avoid the
formation of dust, if necessary siphoning the product off locally. Fine
powder forms flammable and explosive mixtures in air. Avoid all
possible sources of ignition (spark or flame). Take precautionary
measures against electrostatic discharges.

Transport information

Land transport (ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
Class:
Not regulated
Classification code:
-
Packaging group:
-
Labels:
-
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
not regulated
Shippingopen allclose all
Class:
not regulated
Classification code:
-
Packaging group:
-
Labels:
-
Remarksopen allclose all

Marine transport (IMDG)

UN number:
not regulated
Proper shipping name and description:
-
Chemical name:
-
Class:
not regulated
Packaging group:
-
EmS code:
-
Labels:
-
Remarks
Not dangerous cargo. Keep dry.
Avid heat above +50C.
Keep seperated from foodstuffs.

Air transport ICAO/IATA

UN number:
not regulated
Proper shipping name and description:
-
Chemical name:
-
Class:
not regulated.
Packaging group:
-
Labels:
-
Remarksopen allclose all

Additional transport information

Additional transport information
Not dangerous cargo. Keep dry.
Avid heat above +50C.
Keep seperated from foodstuffs.

Exposure controls / personal protection

Control parameters:
Recommended monitoring procedures : If this product contains ingredients with exposure limits, personal,
workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control
measures and/or the necessity to use respiratory protective equipment. Reference should be made to European Standard EN
689 for methods for the assessment of exposure by inhalation to chemical agents and national guidance documents for methods for
the determination of hazardous substances.
Exposure controls
Risk management measures
Occupational exposure controls
Technical measures : If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits.
Personal protection measures
Respiratory protection Use a properly fitted, air-purifying or air-fed respirator complying with
an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or
anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Recommended: In case of dust formation particle filter.
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary. After contamination with product change the gloves immediately and
dispose of them according to relevant national and local regulations Recommended: (< 1 hour) Polyvinyl chloride - PVC or rubber gloves.
Eye protection : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists, gases or dusts. Recommended: safety glasses with side-shields Skin protection : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Recommended: Wear protective clothing.
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Environmental exposure controls
Technical measures Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume
scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or
its ingredients.
Chemical stability : The product is stable.
: Under normal conditions of storage and use, hazardous reactions
will not occur.
Possibility of hazardous
reactions
In the case of dusty organic products the possibility of a dust
explosion should always be considered. exothermic reaction from
Conditions to avoid :
Incompatible materials : No specific data.
Hazardous
decomposition products
: Under normal conditions of storage and use, hazardous
decomposition products should not be produced.

Disposal considerations

Waste treatment methods
Methods of disposal :Examine possibilities for re-utilisation. Product residues and
uncleaned empty containers should be packaged, sealed, labelled,
and disposed of or recycled according to relevant national and local
regulations. Where large quantities are concerned, consult the
supplier. When uncleaned empty containers are passed on, the
recipient must be warned of any possible hazard that may be caused
by residues. For disposal within the EC, the appropriate code
according to the European Waste List (EWL) should be used. It is
among the tasks of the polluter to assign the waste to waste codes
specific to industrial sectors and processes according to the
European Waste List (EWL).

Hazardous waste:The classification of the product may meet the criteria for a
hazardous waste.
Packaging
Methods of disposal:The generation of waste should be avoided or minimised wherever
possible. Waste packaging should be recycled. Incineration or
landfill should only be considered when recycling is not feasible.
Special precautions
This material and its container must be disposed of in a safe way.
Care should be taken when handling emptied containers that have
not been cleaned or rinsed out. Empty containers or liners may
retain some product residues. Avoid dispersal of spilt material and
runoff and contact with soil, waterways, drains and sewers.