Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove victim to fresh air. If breathing is difficult, give oxygen. If not breathing, administer artificial respiration. Seek medical attention immediately.

Emergency measure - Eyes: Immediately flush with copious amounts of water for at least 15 minutes. If irritation persists seek medical attention.

Emergency measure - Skin: Immediately remove contaminated clothing and shoes. Wipe excess material from skin and flush with water at least 15 minutes. Use soap if available or follow by washing with soap and water. Do not use contaminated clothing without laundering. If irritation persists seek medical attention.

Emergency measure - Ingestion: Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water, foam, dry chemical and carbon dioxide.

Product arising from burning: The substance is combustible and will burn if involved in a fire, evolving noxious fumes (eg oxides of carbon and nitrogen).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Avoid release to soil, waterways and ground water.

Wear appropriate personal protective equipment conforming to the relevant national or international standards as previously mentioned in section 2.3.00.

Absorb spillages of solution with a suitable inert material (eg clay). Carefully transfer the spillage to waste containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in the same way as the original containers.

Clean the spillage area with water and detergent.

Dispose of waste material by incineration in accordance with local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in conditions of good industrial hygiene and in conformity with any local regulations in order to minimise exposure.

Engineering controls are necessary to reduce exposure to the substance. Use only in well ventilated areas.

When exposure cannot be prevented or adequately controlled appropriate personal protective equipment should be worn. Such protective equipment should conform to the appropriate international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166


When necessary, appropriate respiratory protection should be used.


Wash hands and exposed skin before eating, drinking or smoking.

Storage: Store in a cool, dry, well-ventilated area.


Keep containers tightly closed when not in use.


Keep away form heat, sparks, and flames.

Packaging of the substance and or preparation: Package type: HDPE pails, lined steel drum or intermediate bulk container

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not applicable
Shippingopen allclose all
Labels:
Not applicable
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not applicable
Shippingopen allclose all
Labels:
Not applicable
Special provisions / remarks
Remarks:
Not applicable

Marine transport (UN RTDG/IMDG)

UN number:
Not applicable
Shipping information
Proper shipping name and description:
Not applicable
Chemical name:
Not applicable
Labels:
Not applicable
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not applicable
Shipping information
Proper shipping name and description:
Not applicable
Chemical name:
Not applicable
Labels:
Not applicable
Special provisions / remarks
Remarks:
Transport code: None
Transport: No specific recommendations.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Technical protection measures - Ensure adequate ventillation to avoid vapour exposure
2. Organisational protection measures - Ensure proper training of employees
3. Hand protection - Utilize appropriate gloves to prevent dermal contact
4. Eye protection - Wear goggles or a face shield to prevent eye contact
5. Respiratory protection - Wear a respirator when working in the absence of adequate ventilation.

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not applicable to a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment is unlikely. Recovery from minor spillages or accidental discharge is possible. Filtration can be used to remove solid dirt particles.

Industry - Possibility of neutralisation: Not reported.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with inert material (eg clay) may be disposed of by incineration at an authorised waste treatment processer in accordance with local regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning under controlled conditions at a licensed waste treatment processor in accordance with local regulations.

Industry - Possibility of destruction - water purification: The substance should not be discharged directly to the sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable

Public at large - Possibility of destruction - others: None reported