Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove patient to fresh air, seek medical attention.
Emergency measure - Eyes: Rinse with plenty of water for at least 15 minutes.
Emergency measure - Skin: Wash with soap and water.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Recommended extinguishing agents: Water, foam, carbon
dioxide and dry powder may be used.

Product arising from burning: Products arising from pyrolysis: Products of combustion may
contain oxides of carbon, nitrogen and sulfur together with
chlorine gas, water and some soot.

Protective equipment: Protective equipment: Skin, eye and respiratory protection
should be worn.

Accidental release measures

Emergency measures in case of spillage: Isolate spillage and remove personnel from the affected
area. Wear suitable protective equipment (See 2.3.1).
Collect the spillage by vacuum and transfer to a suitably
labelled container. Dispose of by incineration at a
suitable facility. Wash spill site with copious amounts of
water and detergent to remove residual material. Avoid dry

Handling and storage

Handling: The substance contains an anti-dust forming agent to avoid
high levels of dust being raised. Ensure adequate
ventilation. An activated carbon filter dust mask, gloves
and safety goggles with side shields should be worn.

Storage: Store in tightly closed, unbreakable container in a cool
dry place, away from excessive heat and direct sunlight.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Transport: No special precautions.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Other dangers: None reported.

Chemical reaction with water: Chemical reaction with water: None reported.

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery for reuse is not possible.

Industry - Possibility of neutralisation: Not applicable.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: The substance can be destroyed of by incineration at a
suitable facility using temperatures of 900 deg C for 10
minutes. Waste gas treatment to remove nitrogen and sulfur
oxides and chlorine gas should be fitted.

Industry - Possibility of destruction - water purification: Waste water from the dyeing process should be treated by
procedures such as coagulation, sedimentation, biological
treatment and absorption by activated carbon etc. The
obtained sludge should then be incinerated after

Public at large - Possibility of recovery/recycling: The substance will only enter the public domain in the form
of dyed articles which can be disposed of in normal
domestic waste.