Substance Information

The REACH registered substance data and the C&L Inventory portal will be upgraded from the 9th November.

Please be aware there may be intermittent unavailability while work in ongoing. The per substance REACH registration status will be made available as soon as possible thereafter. Likewise the per substance indication of harmonised C&L, Seveso directive, or notified C&L regulatory context will be made available as soon as possible.

Please note that it may take a week or two to have everything fully in place, and please be aware in the meantime that the Registration status may be incorrect and the CLP regulatory context may be incompletely shown.

Alcohols, C9-11

EC / List no.: 266-367-6

CAS no.: 66455-17-2

Mol. formula: (CH2)8-10CH4O

formula
According to the notifications provided by companies to ECHA in REACH registrations no hazards have been classified.

This substance has not been registered under the REACH Regulation, therefore as yet ECHA has not received any data about this substance from registration dossiers.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

This substance is used in the following products: biocides (e.g. disinfectants, pest control products), anti-freeze products, coating products, fillers, putties, plasters, modelling clay, finger paints, lubricants and greases and polishes and waxes.
Release to the environment of this substance can occur from industrial use: in the production of articles.
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment) and indoor use in long-life materials with high release rate (e.g. release from fabrics, textiles during washing, removal of indoor paints).

Article service life

Release to the environment of this substance can occur from industrial use: in processing aids at industrial sites, in the production of articles and industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal).
Other release to the environment of this substance is likely to occur from: outdoor use, indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials) and indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).
This substance can be found in products with material based on: stone, plaster, cement, glass or ceramic (e.g. dishes, pots/pans, food storage containers, construction and isolation material) and plastic (e.g. food packaging and storage, toys, mobile phones).

Widespread uses by professional workers

This substance is used in the following products: lubricants and greases, biocides (e.g. disinfectants, pest control products), coating products and fillers, putties, plasters, modelling clay.
This substance is used in the following areas: building & construction work and agriculture, forestry and fishing.
This substance is used for the manufacture of: machinery and vehicles, rubber products, plastic products, mineral products (e.g. plasters, cement), fabricated metal products and furniture.
Release to the environment of this substance can occur from industrial use: in processing aids at industrial sites and in the production of articles.
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials) and indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).

Formulation or re-packing

This substance is used in the following products: pH regulators and water treatment products and laboratory chemicals.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates).
Release to the environment of this substance can occur from industrial use: formulation of mixtures, formulation in materials, as an intermediate step in further manufacturing of another substance (use of intermediates), manufacturing of the substance, in processing aids at industrial sites, in the production of articles, as processing aid, for thermoplastic manufacture, as processing aid and of substances in closed systems with minimal release.

Uses at industrial sites

This substance is used in the following products: fillers, putties, plasters, modelling clay, lubricants and greases, adhesives and sealants, coating products, non-metal-surface treatment products and pH regulators and water treatment products.
This substance is used in the following areas: building & construction work and mining.
This substance is used for the manufacture of: chemicals, mineral products (e.g. plasters, cement) and machinery and vehicles.
Release to the environment of this substance can occur from industrial use: in processing aids at industrial sites and in the production of articles.
Other release to the environment of this substance is likely to occur from: outdoor use and indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners).

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance, formulation of mixtures, formulation in materials, in processing aids at industrial sites, in the production of articles, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, for thermoplastic manufacture, as processing aid and of substances in closed systems with minimal release.

The InfoCard summarises the non-confidential data on substances as held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The InfoCard is automatically generated. Information requirements under different legislative frameworks may therefore not be up–to–date or complete. Substance manufacturers and importers are responsible for consulting official publications. This InfoCard is covered by the ECHA Legal Disclaimer.

ECHA logo about INFOCARD - Last updated: 11/11/2020

Categories Display