Substance Information

The REACH registered substance data and the C&L Inventory portal will be upgraded from the 9th November.

Please be aware there may be intermittent unavailability while work in ongoing. The per substance REACH registration status will be made available as soon as possible thereafter. Likewise the per substance indication of harmonised C&L, Seveso directive, or notified C&L regulatory context will be made available as soon as possible.

Please note that it may take a week or two to have everything fully in place, and please be aware in the meantime that the Registration status may be incorrect and the CLP regulatory context may be incompletely shown.

Reaction mass of 3-[3-(2,3-dihydroxypropoxy)-2-hydroxypropoxy]propane-1,2-diol and 3-(2,3-dihydroxypropoxy)propane-1,2-diol and 3-[3-[3-(2,3-dihydroxypropoxy)-2-hydroxypropoxy]-2-hydroxypropoxy]propane-1,2-diol

EC / List no.: 915-741-3

CAS no.: -

Mol. formula:

formula
According to the notifications provided by companies to ECHA in REACH registrations no hazards have been classified.

This substance has not been registered under the REACH Regulation, therefore as yet ECHA has not received any data about this substance from registration dossiers.

This substance is used by consumers, in articles, in formulation or re-packing, at industrial sites and in manufacturing.

This substance is used by consumers, in articles, in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

This substance is used in the following products: cosmetics and personal care products.
ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.

Article service life

Release to the environment of this substance can occur from industrial use: manufacturing of the substance, formulation of mixtures, in processing aids at industrial sites, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, as processing aid and of substances in closed systems with minimal release.
Other release to the environment of this substance is likely to occur from: indoor use as processing aid, outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials), outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)), indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment) and indoor use in long-life materials with high release rate (e.g. release from fabrics, textiles during washing, removal of indoor paints).
This substance can be found in products with material based on: fabrics, textiles and apparel (e.g. clothing, mattress, curtains or carpets, textile toys) and paper (e.g. tissues, feminine hygiene products, nappies, books, magazines, wallpaper).

Widespread uses by professional workers

ECHA has no public registered data indicating whether or in which chemical products the substance might be used. ECHA has no public registered data on the types of manufacture using this substance. ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.

Formulation or re-packing

This substance is used in the following products: adhesives and sealants, coating products, inks and toners, laboratory chemicals, paper chemicals and dyes, perfumes and fragrances, polymers, textile treatment products and dyes and cosmetics and personal care products.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates).
Release to the environment of this substance can occur from industrial use: manufacturing of the substance, formulation of mixtures, in processing aids at industrial sites, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, as processing aid and of substances in closed systems with minimal release.
Other release to the environment of this substance is likely to occur from: indoor use as processing aid, outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials), outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)), indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment) and indoor use in long-life materials with high release rate (e.g. release from fabrics, textiles during washing, removal of indoor paints).

Uses at industrial sites

This substance is used in the following products: adhesives and sealants, coating products, inks and toners, laboratory chemicals, paper chemicals and dyes, perfumes and fragrances, polymers, textile treatment products and dyes and cosmetics and personal care products.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates).
This substance is used in the following areas: agriculture, forestry and fishing and formulation of mixtures and/or re-packaging.
This substance is used for the manufacture of: food products, textile, leather or fur, wood and wood products, chemicals and plastic products.
Release to the environment of this substance can occur from industrial use: manufacturing of the substance, formulation of mixtures, in processing aids at industrial sites, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, as processing aid and of substances in closed systems with minimal release.
Other release to the environment of this substance is likely to occur from: indoor use as processing aid, outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials), outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)), indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment) and indoor use in long-life materials with high release rate (e.g. release from fabrics, textiles during washing, removal of indoor paints).

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance, formulation of mixtures, in processing aids at industrial sites, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, as processing aid and of substances in closed systems with minimal release.
Other release to the environment of this substance is likely to occur from: indoor use as processing aid, outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials), outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)), indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment) and indoor use in long-life materials with high release rate (e.g. release from fabrics, textiles during washing, removal of indoor paints).

The InfoCard summarises the non-confidential data on substances as held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The InfoCard is automatically generated. Information requirements under different legislative frameworks may therefore not be up–to–date or complete. Substance manufacturers and importers are responsible for consulting official publications. This InfoCard is covered by the ECHA Legal Disclaimer.

ECHA logo about INFOCARD - Last updated: 10/11/2020

Categories Display