Substance Information

NB: Registration status and tonnage

  • The REACH Registered substance portal was updated on 9th November 2020; the REACH registered factsheets were further updated on 21st December 2020. Details of the improvements can be found at Dissemination Platform Updates. Reprocessing the entire dataset is ongoing since 21 December 2020. ECHA is making all possible efforts to synchronise the registration status and tonnage with the shortest delay.
  • While reprocessing is ongoing please note that substances whose registration dossiers are not yet processed can incorrectly state in the Infocard that they are not registered under REACH. In these cases if there is a link to a REACH registered substance factsheet then the substance IS registered. The correct total tonnage band can be found in the factsheet(s) for the substance.

2-(diethylamino)ethyl methacrylate

EC / List no.: 203-275-7

CAS no.: 105-16-8

Mol. formula: C10H19NO2

formula
GHS07: Health hazard

Warning! According to the harmonised classification and labelling (CLP00) approved by the European Union, this substance causes serious eye irritation, is harmful if inhaled, causes skin irritation and may cause an allergic skin reaction.

  • Ss

Skin sensitising

This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 100 to < 1 000 per annum.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

This substance is used in the following products: adhesives and sealants and inks and toners.
Other release to the environment of this substance is likely to occur from: indoor use.

Article service life

Release to the environment of this substance can occur from industrial use: industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal).
Other release to the environment of this substance is likely to occur from: indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).
This substance can be found in complex articles, with no release intended: vehicles not covered by End of Life Vehicles (ELV) directive (e.g. boats, trains, metro or planes).
This substance can be found in products with material based on: paper (e.g. tissues, feminine hygiene products, nappies, books, magazines, wallpaper) and plastic.

Widespread uses by professional workers

This substance is used in the following products: inks and toners.
This substance is used in the following areas: printing and recorded media reproduction.
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.

Formulation or re-packing

This substance is used in the following products: inks and toners.
Release to the environment of this substance can occur from industrial use: formulation of mixtures and formulation in materials.

Uses at industrial sites

This substance is used in the following products: coating products and inks and toners.
This substance is used in the following areas: agriculture, forestry and fishing, building & construction work, health services, municipal supply (e.g. electricity, steam, gas, water) and sewage treatment and printing and recorded media reproduction.
This substance is used for the manufacture of: chemicals, wood and wood products, pulp, paper and paper products and plastic products.
Release to the environment of this substance can occur from industrial use: as an intermediate step in further manufacturing of another substance (use of intermediates), for thermoplastic manufacture, as processing aid, in processing aids at industrial sites, in the production of articles, as processing aid and of substances in closed systems with minimal release.

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance.

The InfoCard summarises the non-confidential data on substances as held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The InfoCard is automatically generated. Information requirements under different legislative frameworks may therefore not be up–to–date or complete. Substance manufacturers and importers are responsible for consulting official publications. This InfoCard is covered by the ECHA Legal Disclaimer.

ECHA logo about INFOCARD - Last updated: 25/12/2020

Categories Display