Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 222-340-0 | CAS number: 3437-84-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://chesar.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_physical-and-chemical-properties.png)
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- October 2011 – July 2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Well conducted study, under Internal management system, according to OECD and EC guidelines, certificates of analysis included in the report.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Version / remarks:
- , May 31, 2008
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Version / remarks:
- Adopted July 27, 1995
- Deviations:
- no
- GLP compliance:
- no
- Remarks:
- Internal management system
- Type of method:
- oscillating densitimeter
- Type:
- relative density
- Density:
- 0.975
- Temp.:
- 20 °C
- measurement 1: 0.9981 g/cm3
- measurement 2: 0.9981 g/cm3
- measurement 3: 0.9980 g/cm3
- measurement 1: 0.9981 g/cm3
- measurement 2: 0.9981 g/cm3
- measurement 3: 0.9980 g/cm3
- Conclusions:
- The relative density of Bisisobutyryl peroxide at 20°C is 0.9752.
- Executive summary:
The relative density of Bisisobutyryl peroxide was calculated from density studies of two diluted formulations of this substance and of the solvent used in these formulations. The study had to be carried out in this way, because Bisisobutyryl peroxide cannot be handled safely in its pure form.
The relative density of the three test substances was determined according toEC Regulation No 440/2008, Guideline A.3 and according to OECD Guideline 109 , and in accordance with European Chemicals Agency (ECHA), Guidance on information requirements and chemical safety assessment, Chapter R.7a, Endpoint specific guidance, May 2008.
The relative density of Bisisobutyryl peroxide at 20°C is 0.9752.
Reference
Calibration and validity verification
The calibration was carried out on August 16, 2010.
The measured density of the calibration liquids at 20°C is mentioned in table below. Also the deviation from the literature values is mentioned. The mean value for the calibration liquids agrees within ± 0.002 g/cm3(accuracy range) with the literature values.
Table measured density of calibration liquids at 20°C
Calibration liquid |
Measurement |
Density [g/cm3] |
Mean density value [g/cm3] |
Deviation from literature value [g/cm3] |
Demineralized water |
1 |
0.9982 |
0.9982± 0.0000 |
0.0000 |
2 |
0.9982 |
|||
3 |
0.9982 |
|||
Ethanol |
1 |
0.7897 |
0.7896± 0.0001 |
0.0003 |
2 |
0.7896 |
|||
3 |
0.7896 |
|||
4 |
0.7896 |
|||
Dichloro-methane |
1 |
1.3244 |
1.3248± 0.0004 |
0.0018 |
2 |
1.3251 |
|||
3 |
1.3252 |
|||
4 |
1.3246 |
The validity of the method was verified prior to the measurements with the test substances using demineralized water.
Measured density of water at 20°C (determined just before the measurement with Trigonox 187-C40):
Measured density of water at 20°C (determined just before the measurement with Trigonox 187-C70 and with isododecane):
Test substances
The measured density of the test substances at 20°C
Test substance |
Measurement |
Density [g/cm3] |
Mean density value [g/cm3] |
Date of test |
Trigonox 187-C40 (content: 37.7%) |
1 |
0.8300 |
0.8301 ± 0.0001 |
10/31/2011
|
2 |
0.8302 |
|||
3 |
0.8300 |
|||
Trigonox 187-C70 (content: 71.3%) |
1 |
0.9115 |
0.9111 ± 0.0004 |
07/24/2012 |
2 |
0.9112 |
|||
3 |
0.9107 |
|||
Isododecane |
1 |
0.7478 |
0.7479 ± 0.0002 |
07/24/2012
|
2 |
0.7481 |
|||
3 |
0.7478 |
|||
4 |
0.7478 |
Relative density of Bisisobutyryl peroxide
The density of Bisisobutyryl peroxide is calculated from the measured values of the three test substances. This is done by fitting the measured data of table above and calculate the value for Bisisobutyryl peroxide in its pure form by linear extrapolation.
The linear fit result in the next density equation with a regression coefficient of 0.9992.
D = 0.7466 + 0.002286C
With:
D = density [g/cm3]
C = concentration of Bisisobutyryl peroxide [%]
The density of 100% Bisisobutyryl peroxide calculated from this equation is 0.9752 g/cm3. The linear fit gives a high regression coefficient. So, the calculated density is a reliable value.
The relative density of Bisisobutyryl peroxide at 20°C is 0.9752.
Description of key information
The relative density of pure Bisisobutyryl peroxide at 20°C is 0.9752.
Key value for chemical safety assessment
- Relative density at 20C:
- 0.975
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)