Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 402-370-2 | CAS number: 149057-70-5 AOC 1020X
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Hydrolysis
Administrative data
- Endpoint:
- hydrolysis
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 1987
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- study well documented, meets generally accepted scientific principles, acceptable for assessment
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 1 987
- Report date:
- 1987
Materials and methods
Test guideline
- Qualifier:
- no guideline followed
- Principles of method if other than guideline:
- Study authors have been advised that, as the ydrolysis reaction is a significant chemical property of the aluminium alkoxides, they should attempt to quantify the rate of reaction for the present compound.
There is a recommended method for determining the rate of hydrolysis of a substance contained in the Official Journal of the European Communicites No. L251 part C10; however, this only applies to water-soluble substances.·It was therefore necessary to design an experiment to measure the hydrolysis of SA2/1/OA - GLP compliance:
- not specified
Test material
- Reference substance name:
- (ethyl-3-oxobutanoato-O'1,O'3)(2-dimethylaminoethanolato)(1-methoxypropan-2-olato)aluminium(III), dimerised
- EC Number:
- 402-370-2
- EC Name:
- (ethyl-3-oxobutanoato-O'1,O'3)(2-dimethylaminoethanolato)(1-methoxypropan-2-olato)aluminium(III), dimerised
- Cas Number:
- 149057-70-5
- Molecular formula:
- C14H28AlNO6
- IUPAC Name:
- octaaluminium(3+) octakis((2Z)-4-ethoxy-4-oxobut-2-en-2-olate) octakis(1-methoxypropan-2-olate) octakis(2-(dimethylamino)ethan-1-olate)
- Reference substance name:
- 1-methoxypropan-2-ol
- EC Number:
- 203-539-1
- EC Name:
- 1-methoxypropan-2-ol
- Cas Number:
- 107-98-2
- Molecular formula:
- C4H10O2
- IUPAC Name:
- 1-methoxypropan-2-ol
- Test material form:
- liquid
- Details on test material:
- purified with vacum distillation, analyzed by Gel permeation chromatography as stated in one of the study reports
Constituent 1
impurity 1
Study design
- Analytical monitoring:
- yes
- Details on sampling:
- research of hydrolysis products : ethylacetaacetate, dimethylaminoethanol, methoxypropanol
- Buffers:
- xylene
- Estimation method (if used):
- It was necessary to be able to detect and quantify either SA2/l/OA or its hydrolysis products. We do not at present have a direct means of detecting SA2/l/OA in an easily quantifiable manner, however, since it could be anticipated that the hydrolysis would be rapid we decided to base the method on the detection of the hydrolysis products, namely ethylacetoacetate, dimetbylaminoethanol and methoxypropanol. The method chosen for this was ·gas chromatography because it enabled these hydrolyses products to be separated and quantified. It was also quick and available in-house.
Test Sample
The sample of SA2/l/OA used in these e periments was from batch number 16/2/87, ie. the same material as that used in all the tests conducted under the Notification of New Substances Regulations 1982.
Experiment 1
The gas chromatograph conditions that gave suitable separation are given with a trace of a 1:1:1 ethylacetoacetate, dimethylaminoethanol, metboxypropanol mixture.
Experiment 2
The hydrolysis was carried out by weighing xylene (35g), wate·r ( 15g) and SA2/l/OA (4g) into a clean .and dry 150 ml conical flask (the amou1nt of water used gives a molar ratio of water to aluminium of 69.3:1). The flan;k was then stoppered and clamped to a Griffin flask shaker which was set 1,1t ! speed (approximately 200 oscillations minute-1). After 5 minutes this had fonned an e1nulsion of :itylene, water and SA2/1/0A hydrolysis products. To separate the organic phase, the mixture was filtered through a silicone treated Whatman IPS filter paper (12,5 cm diameter), that had prevfously been washed by passing through 100 ml of xylene. The organic phase wa:, collected as the filtrate and a sample was injected into the gas chromatouraph. The conditions and a sample trace -are shown in Appendix 2. This sho ,s that the peak due to dimethylaminoethanol is now reduced due to strong association with the aqueous phase and that the relatively large xylene peak does not overlap with the areas in which ethylacetoacetate, dimethylaminoethanol and methoxypropanol are to be found.
Experiment 3
A sample of xylene (34.99g) and SA2/1/0A (4,02g) was prepared and this was injected into the gas chromatograph to give the trace shown in Appendix 3 together with the conditions. The peak due to methoxypropanol is present whereas that due to ethylacetoacetate is absent. This infers tha.t there is either some free methoxypropanol present in SA2/l/OA due to incomplete distillation during its preparation or that some decomposition of SA2/l/OA occurs in the chromatography column, It was concluded that the most suitable peak to monitor in the hydrolysis experiment would be that due to ethylac tQacetate. From previous observations of ours and of previous workers\ZJ it is known that ethylacetoacetate bonds more strongly to aluminium than do most alcohols due to its tendeocy to form a chelated structure and it is therefore reasonable to infe that its formation will indicate the hydrolysis of SA2/1/0A.
Results and discussion
- Test performance:
- HYDROLYSIS EXPERIMENT : Experiment 4
Samples were weighed in the order xylene then SA2/l/OA then water into clean and dry 150 ml conical flasks. The balance used was a Sartorius Modal 1413 MP8-l with a readability of 0.01g.
Each flask was sealed with a B24 ground glass stopper and was attached to the laboratory shaker that was set at approximately 200 oscillations per minute. Flask 1 was removed after 10 minutes shaking, flask 2 after 20 minut11s, flask 3 after 30 minutes and flask 4 after 40 minutes. The contents of ench flask were immediately filtered through a prewashed silicone treated filter paper as described in Experiment 2 to yield an organic phase filtrate which was collected.
The organic phase filtrate of flask 1 was labelled Bxptl2/8/87Rl0 that of flask 2 was labelled Hxptl2/B/87R2, that of flask 3 was labelled HxpU2/8/87R3 and that of flask 4 vas labelled Hxptl2/8/87R4, The filtration operation took approximately 3 minutes to complete in each case.
The organic phase filtrates were injected into the gas chromatograph. The calibration samples described in Experiment 5 were injected during the same session. The results show the height of the peaks observed for the keto and enol forms of ethylacetoacetate presnet in the organic filtrates from experiment 4.
Experiment 5
Four calibration samples were prepared and labelled. - Transformation products:
- yes
Identity of transformation products
- No.:
- #1
Reference
- Reference substance name:
- Unnamed
- IUPAC name:
- ethylacetoacetate
- Molecular formula:
- C6H9O3
- Molecular weight:
- ca. 115
- SMILES notation:
- CCCC(=O)C(=O)O
Total recovery of test substance (in %)
- Remarks on result:
- not measured/tested
- Remarks:
- it could be anticipated that the hydrolysis would be rapid
Dissipation DT50 of parent compound
- Remarks on result:
- not determinable
- Other kinetic parameters:
- Under the conditions used in this study hydrolysis of the new substance is complete at 10 minutes.
- Results with reference substance:
- The average amount of hydrolysis product ethylacetoacetate observed in the hydrolysis as 79% of the theoretical maximum.
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Conclusions:
- Under the conditions used in this study hydrolysis of the new substance is complete at 10 minutes.
- Executive summary:
Under the conditions used in this study hydrolysis of the new substance is complete at 10 minutes.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.