Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 917-828-1 | CAS number: 185857-35-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://chesar.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_ecotoxicological-information.png)
Toxicity to microorganisms
Administrative data
Link to relevant study record(s)
- Endpoint:
- activated sludge respiration inhibition testing
- Type of information:
- read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Study period:
- 10th November 1993 to 24th February 1994
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: OECD Guideline study, sludge density lower than guideline recommendations.
- Justification for type of information:
- A discussion and report on the read across strategy is given as an attachment in IUCLID Section 13.
- Reason / purpose for cross-reference:
- read-across: supporting information
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test
- Deviations:
- yes
- Remarks:
- sludge density lower than guideline recommendations
- GLP compliance:
- yes
- Specific details on test material used for the study:
- Details on properties of test surrogate or analogue material (migrated information):
No test surrogate or analogue material - Analytical monitoring:
- no
- Details on sampling:
- Not relevant (no analytical monitoring)
- Vehicle:
- no
- Details on test solutions:
- The test susbtance was known to be water soluble up to 10 mg/L.
To prepare the 1 mg/L test medium, a stock solution (10 of test substance per liter) was made approimately 1 hour 30 minutes before the start of the study, dissolving the test substance into dilution water (distilled water); pH of this stock solution was not adjusted.
To prepare the 10, 50 and 100 mg/L test media, no stock solution was prepared (the test substance was directly added to the test media). - Test organisms (species):
- activated sludge of a predominantly domestic sewage
- Details on inoculum:
- - Source:activated sludge from a sewage treatment plant treating predominantly domestic sewage (Pierre-Bénite - F - 69310 Lyon)
- Method of cultivation: the following stock solution was made for activated sludge alimentation (synthetic seawage), and used at the rate of 16 mL for 500 mL fo final medium:
- Composition (grammes per litre of distilled water):
Peptone 16.0
Meat extract 11.0
Urea 3.0
NaCl 0.7
CaCl2-2H2O 0.4
MgSO4-7H2O 0.2
K2HPO4 2.8
- pH: 7
- Preparation of inoculum for exposure:
- The sludge was not used on the day of collection: it was maintained aerated at thermoregulated temperature (20°C), and added with synthetic sewage.
- Coarse particles were removed after settling for 15 minutes.
- The concentration of suspended solids was evaluated from a small amount of sludge.
- The sludge was centrifuged and the suspended solids obtained were washed before to be resuspended for the preparation of the inoculum (centrifuged 3 times with synthetic sewage for 5 minutes at 2,500 r.p.m., with discarding of the supernatants).
- The suspended solids were then re-suspended into synthetic sewage so as to obtain a concentration of suspended solids of approximately 2 grammes per litre in the inoculum.
- The inoculum was then kept aerated and at thermoregulated temperature (20°C) until its using for the preparation of the media.
- Pretreatment: no pretreatment
- Initial biomass concentration: 800 mg of suspended solids per litre of control, reference and test media. - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 3 h
- Remarks on exposure duration:
- No remarks
- Post exposure observation period:
- No post-exposure
- Hardness:
- No data
- Test temperature:
- 17.5 - 21.9 °C (see table 2 §Remarks on results including tables and figures)
- pH:
- 7.77 - 8.03 (see table 2 § Remarks on results including tabkes and figures)
- Dissolved oxygen:
- Measurements of the dissolved oxygen concentration over a period of 10 minutes (or until the concentration reaches 1 mg/L) after 3 hours exposure, in 500 mL samples from each container, performed in 500mL BOD flasks, with O2-electrode.
- Salinity:
- Not relevant (frehswater study)
- Nominal and measured concentrations:
- Nominal concenrations (range-finding test) : 0, 1, 10, 50 and 100 mg/L
- Details on test conditions:
- TEST SYSTEM
- Test vessel:
- Type (delete if not applicable): closed with covers
- Material, size, headspace, fill volume: 1000 mL beakers containing 500ml test medium
- Aeration: continuous aeration (air-flow: 0.5 to 1 litre per minute) and continuous magnetic stirring
- No. of vessels per concentration (replicates): 1
- No. of vessels per control (replicates): 2
- Biomass loading rate: 800 mg/L
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: distilled water
- Adjustment of pH: no
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
Oxygen consumption
TEST CONCENTRATIONS
- Range finding study
- Test concentrations: 0, 1, 10, 50 and 100 mg/L
- Results used to determine the conditions for the definitive study: No definitive study (EC50 not reached in the range-finding test) - Reference substance (positive control):
- yes
- Remarks:
- 3,5-dichlorophenol
- Key result
- Duration:
- 3 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 100 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Remarks on result:
- other: no remarks
- Details on results:
- See table 1 §Remarks on results including tables anf figures
- Results with reference substance (positive control):
- See table 1 §Remarks on results including tables anf figures
- Reported statistics and error estimates:
- No statistics (range-finding study): it was imposible to reach the EC50 with the concenrations tested
- Validity criteria fulfilled:
- yes
- Conclusions:
- The 3h-EC50 of HDF 200 for respiration inhibition in activated sludge is >100 mg/L
- Executive summary:
Microorganisms from activated sludge (predominantly domestic) were exposed to a range of concentrations of test substance for 3 hours: 1, 10, 50 and 100 mg test subtance per litre of test medium according to OECD guideline 209. Two control media (without test substance) were tested. A "physico-chemical assay" was also performed in the presence of mercuric chloride as biological oxygen respiration inhibitor, in order to determine the total consumption of oxygen as a result of non-biological processes.
The dissolved oxygen concentration was measured in 500 mL from each medium after approximately 3 hours of exposure.
A reference substance, 3,5 - dichlorophenol, was tested under the same conditions in order to control the sensitivity of the activated sludge (3 concentrations).
The 3h-EC50 value was higher than 100 mg/L in the range-finding study (phase I), then the study was considered as complete and no further evaluation of this value was performed.
The criteria quality for the study, as notified in the OECD and EEC standards and relative levels of oxygen consumption in the two control media and to the toxicity of 3,5 -dichlorophenol were respected.
No inhibition of respiration was observed under the experimental conditions employed, until the concentration of 100 mg of test substance per liter of test medium; the 3h-EC50 (effective concentration which inhibits respiration in activated sludge by 50%) may be expressed as follows:
EC50 - 3 hours = higher than 100 mg/L
Reference
Table 1. Respiration rates and percent inhibitions (rounded values)
|
Flask number |
Respiration rates (mg/L/h) |
Inhibition of respiration (%) |
Control assay |
FB1 |
40 |
/ |
FB2 |
41 |
/ |
|
Test substance assay |
FT1 1 mg/L |
88 |
-116 |
FT10 10 mg/L |
58 |
-42 |
|
FT50 50 mg/L |
50 |
-23 |
|
FT100 100 mg/L |
60 |
-47 |
|
Reference assay |
FR5 5 mg/L |
57 |
-41 |
FR15 15 mg/L |
28 |
31 |
|
FR30 30 mg/L |
15 |
63 |
|
Physico-chemical assay |
FPC |
0 |
100 |
Table 2. pH and temperatures at the start and the end of the study
|
Flask number |
Start of the study |
End of the study |
||
|
pH value |
Temperature °C |
pH value |
Temperature °C |
|
Control assay |
FB1 |
7.99 |
20.7 |
8.25 |
20.3 |
FB2 |
8.01 |
19.8 |
8.69 |
17.5 |
|
Test substance assay |
FT1 1 mg/L |
7.77 |
21.5 |
7.95 |
21.9 |
FT10 10 mg/L |
7.87 |
20.7 |
8.12 |
19.8 |
|
FT50 50 mg/L |
8.00 |
20.1 |
8.47 |
18.4 |
|
FT100 100 mg/L |
8.03 |
20.4 |
8.15 |
21.1 |
|
Reference substance assay |
FR5 5 mg/L |
7.99 |
20.8 |
8.17 |
20.7 |
FR15 15 mg/L |
7.84 |
20.9 |
8.32 |
20.7 |
|
FR30 30 mg/L |
7.86 |
21.2 |
8.27 |
20.3 |
|
Physico-chemical assay |
FPC |
5.95 |
20.0 |
6.47 |
20.0 |
Description of key information
There is no data available for this substance. However, key data is available for a structural analogues. The data is read across to this substance based on analogue read across and a discussion and report on the read across strategy is provided as an attachment in IUCLID Section 13.
Hydrocarbons, C14-C18, n-alkanes, isoalkanes, cyclics, <2% aromatics presented a 3h-EC50 (respiration inhibition) for activated sludge of >100 mg/L.
This substance is considered to display no acute toxicity to aquatic microorganisms based on an analogue read across approach.
Key value for chemical safety assessment
Additional information
One study dealing with toxicity to microorganisms was performed with Hydrocarbons, C14-C18, n-alkanes, isoalkanes, cyclics, <2% aromatics (TOTAL, 1994). The EC50was reported to be greater than 100 mg/L.
Moreover, the biodegradation studies showed that the substance is readily biodegradable and therefore it is not toxic to microorganisms.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)