Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

In case of skin contact:Immediately take off all contaminated clothing.

Areas of the body that have - or are only even suspected of having - come into contact with the product must be rinsed immediately with plenty of running water and possibly with soap.Wash thoroughly the body (shower or bath).Remove contaminated clothing immediately and dispose off safely.

After contact with skin, wash immediately with soap and plenty of water.

In case of eyes contact: After contact with the eyes, rinse with water with the eyelids open for a sufficient length oftime, then consult an opthalmologist immediately.Protect uninjured eye.

In case of Ingestion:Give nothing to eat or drink.Do not under any circumstances induce vomiting. OBTAIN A MEDICAL EXAMINATION IMMEDIATELY.

In case of Inhalation:In case of inhalation, consult a doctor immediately and show him packing or label.

Most important symptoms and effects, both acute and delayed

Inhalation: Irritation of the respiratory tract.

May cause eyes irritation.

May cause skin irritation / eczema

Indication of any immediate medical attention and special treatment needed

In case of accident or unwellness, seek medical advice immediately (show directions for use orsafety data sheet if possible).

Treatment:Treat symptomatically.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media:Water.Carbon dioxide (CO2).

Extinguishing media which must not be used for safety reasons:None in particular.

Special hazards arising from the substance or mixture

Do not inhale explosion and combustion gases.Burning produces heavy smoke.

Advice for firefighters

Use suitable breathing apparatus .

Collect contaminated fire extinguishing water separately. This must not be discharged intodrains.

Move undamaged containers from immediate hazard area if it can be done safely.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

For non emergency personnel: Wear personal protection equipment. Wear breathing apparatus if exposed to vapours/dusts/aerosols.Provide adequate ventilation.Use appropriate respiratory protection.See protective measures under point 7 and 8.

For emergency responders:Wear personal protection equipment.

Environmental precautions

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.Retain contaminated washing water and dispose it.In case of gas escape or of entry into waterways, soil or drains, inform the responsibleauthorities.Suitable material for taking up: absorbing material, organic, sand

Methods and material for containment and cleaning up

Wash with plenty of water.

Handling and storage

Precautions for safe handling

Avoid contact with skin and eyes, inhalation of vapours and mists.Use localized ventilation system.Don't use empty container before they have been cleaned.

Before making transfer operations, assure that there aren't any incompatible material residuals in the containers. Contamined clothing should be changed before entering eating areas. Do not eat or drink while working.See also section 8 for recommended protective equipment.

Conditions for safe storage, including any incompatibilities

The product may absorb water if not stored under the specified conditions. This could affect reativity, appearance, and performance. Therefore, keep hermetically sealed packagings to avoid contamination. Keep in the original container well closed. Do not store in open or unlabelled containers. Keep containers in a vertical and safe position avoiding the possibility of falls or bumps. Store in a cool place away from any source of heat and direct exposure to sunlight.

Keep away from food, drink and feed.

Incompatible materials: None in particular.

Instructions as regards storage premises: Adequately ventilated premises.

Specific end use(s)

None in particular

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not applicable
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not applicable
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not applicable
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not applicable
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

No occupational exposure limit available

DNEL Exposure Limit Values: N.A.

PNEC Exposure Limit Values: N.A.

Exposure controls

Eye protection: Full frame and side protection glasses (EN 166).

Protection for skin: Wear clothing that offers extensive protection to the skin, for example. cotton, Rubber, PVC or viton. Wear workwear with long sleeves and safety footwear for professional use of category II (Ref. 89/686 / EEC and ISO 20344). Wash with soap and water after removing protective clothing.

Protection for hands: When handling the pure product, use chemical resistant gloves (EN374-1 / EN374-2 /EN374-3).

Respiratory protection: We recommend using a P-type filtering mask (EN 149), or equivalent device, whose class (1, 2 or 3) and actual need are to be determined based on the outcome of the risk assessment .

Thermal Hazards: No information available

Environmental exposure controls: Prevent product from entering the sewage system and / or surface water.

Appropriate engineering controls: Ensure adequate ventilation, especially in closed areas.

Stability and reactivity

Reactivity

There aren't particular dangers of reaction with other substances under normal conditions of use.

Chemical stability

The substance is stable under normal environmental conditions and foreseeable temperature and pressure conditions during storage and handling.

Possibility of hazardous reactions

None

Conditions to avoid

Avoid accumulating dust in the environment. Direct heat, high temperatures, to avoid the release of fumes and damage to the containers.

Incompatible materials

Strong Oxidizing agents

Hazardous decomposition products

On burning: release of toxic and corrosive gases / vapors (nitrous vapors, hydrochloric acid, carbon monoxide / carbon dioxide).

Disposal considerations

Waste treatment methods

Recover, if possible. Send to authorised disposal plants or for incineration under controlled conditions. In so doing, comply with the local and national regulations currently in force.

Additional disposal information:

Do not reuse empty containers. Dispose of them in accordance with applicable regulations. Any product residues should be disposed of in accordance with applicable regulations by authorized companies. Retrieve if possible. Send to authorized disposal plants or incineration under controlled conditions. Work according to local and national regulations.

CONATMINATED PACKAGING: Contaminated packaging should be sent to recovery or disposal in accordance with national waste management regulations.