Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
In case of skin contact: immediately take off all contaminated clothing. Wash immediately with running water and soap if areas of the body that have come in contact with the product, even if only suspected. Wash thoroughly the body (shower or bath).
In case of eyes contact: after contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist immediately. Protect uninjured eye.
In case of Ingestion: do not under any circumstances induce vomiting. OBTAIN A MEDICAL EXAMINATION IMMEDIATELY.
In case of Inhalation: in case of inhalation, consult a doctor immediately and show him packing or label.
After contact with skin, wash immediately with soap and plenty of water.

Most important symptoms and effects, both acute and delayed

Indication of any immediate medical attention and special treatment needed
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Treatment: none

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: carbon dioxide (CO2).
Extinguishing media which must not be used for safety reasons: avoid water jets to disperse the product. None in particular.

Special hazards arising from the substance or mixture
Do not inhale explosion and combustion gases.
Burning produces heavy smoke.
Substance that can sustain combustion when exposed to heat and ignition sources. Thermal decomposition produces toxic fumes of oxides of nitrogen and carbon. In the absence of oxygen may generate other toxic gases. Like most organic powders, may cause an explosion if the powder is dispersed into the air and set off.

Advice for fire-fighters
Use suitable breathing apparatus.
Wear respirator, gloves, protective footwear. CAUTION: Pressurized containers may explode when exposed to fire. And 'recommended the use of breathing apparatus and full protection for fire fighting, since the combustion of this substance may generate toxic fumes, corrosive and flammable. If possible contain water used for fire fighting and collect for later disposal
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment.
Wear breathing apparatus if exposed to vapours/dusts/aerosols.
Provide adequate ventilation.
Use appropriate respiratory protection.
See protective measures under point handling and storage and Protective controls/personal protection.

Environmental precautions
Circumscribe the area of the spill and prevent the staff will come into contact if not properly protected. Avoid flames, sparks and prevent static buildup. Avoid generation of dust.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Retain contaminated washing water and dispose it.
In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities.
Suitable material for taking up: absorbing material, organic, sand

Methods and material for containment and cleaning up
Wash with plenty of water.

Handling and storage

Precautions for safe handling
Avoid contact with skin and eyes, inhaltion of vapours and mists.
Use localized ventilation system.
Don't use empty container before they have been cleaned.
Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.
Contamined clothing should be changed before entering eating areas.
Do not eat or drink while working.
See also section Protective controls/personal protection for recomened protective equipment.

Conditions for safe storage, including any incompatibilities
Always keep the containers tightly closed.
Keep away from food, drink and feed.
Incompatible materials: none in particular.
Instructions as regards storage premises: adequately ventilated premises.

Specific end use(s)
None in particular

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not classified
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not classified
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not classified
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not classified
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
(4S,4aS,5aS,6S,12aS)-4-(dimethylamino)-3,6,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-1,4,4a,5,5a,6,11,12a-octahydrotetracene-2-carboxamide hydrochloride (1:1)
Index: NA, CAS: 64-75-5, EC No: 200-593-8
TLV TWA - TLV STEL- OEL 8h- OEL short: none.

Exposure controls
Eye protection: safety glasses with side protection or estate or visor. Must be available eye wash station. Work, however, according to good working practices. Use close fitting safety goggles, don't use eye lens.
Protection for skin: use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton.
Protection for hands: use protective gloves that provides comprehensive protection, e.g. P.V.C., neoprene or rubber.
Respiratory protection: are to be preferred closed-loop systems like Glovebox. Provide exhaust systems in the workplace. Avoid inhalation of vapors and dust. Adequate ventilation to the premises where the product is stored and / or manipulated, however, avoid excessive ventilation and dust dispersed generation. Change clothes at the end of shift. Use respiratory protection where ventilation is insufficient or exposure is prolonged, e.g. CEN/FFP-2(S) or CEN/FFP-3(S).
Thermal Hazards: none
Environmental exposure controls: none

Stability and reactivity

Reactivity: stable under normal conditions
Chemical stability: stable under normal conditions
Possibility of hazardous reactions: N.D.
Conditions to avoid: stable under normal conditions.
Incompatible materials: N.D.
Hazardous decomposition products: N.D.

Disposal considerations

Waste treatment methods: recover if possible. In so doing, comply with the local and national regulations currently in force.