Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 930-384-3 | CAS number: -
Flammability
Administrative data
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- February 2009
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Study by a laboratory having a GLP certificate
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 009
- Report date:
- 2009
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- Certificate on january 29th 2008
Test material
Reference
- Name:
- Unnamed
- Type:
- Constituent
Results and discussion
Pyrophoric solids
- Test procedure:
- ignition time on contact with air
- Remarks:
- Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
- Remarks on result:
- no ignition on contact with air (not further specified)
- Remarks:
- corresponding to 'no' in migrated source record.
Pyrophoric liquids
- Test procedure:
- ignition time on contact with air
- Remarks:
- Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
- Remarks on result:
- no ignition on contact with air (not further specified)
- Remarks:
- corresponding to 'no' in migrated source record.
Any other information on results incl. tables
Results
Preliminary test
Experimental conditions
Humidity About 28%
Room temperature About 20 °C
Atmospheric pressure 98.5 kPa
Assay No. 1
As the test item was a very viscous liquid, the mould and the test item inside were put at about -20 °C during 30 minutes to obtain a solid unbroken strip. The test item was not completely solidified, the pile started to spread out. At the contact of the burner’s flame, the test item melted and neither inflammation nor propagation was observed.
Assay No. 2
The same observations as for the assay No. 1 were recorded.
Main test
Taking into account the results obtained during the preliminary test, no main test was performed.
Conclusion
The test of flammability of solids following EC A10 method can not be considered as applicable to the test item.
Applicant's summary and conclusion
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
