Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 941-146-3 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
General information: Medical treatment necessary. Remove victim out of the danger area. Put victim at rest, cover with a blanket and keep warm. Do not leave affected person unattended. If unconscious place in recovery position and seek medical advice.
In case of inhalation: Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
In case of skin contact: Wash immediately with: Water Do not wash with: Solvents/Thinner.
After eye contact: In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
After ingestion: Rinse mouth thoroughly with water. Call a physician in any case! Do NOT induce vomiting.
In case of inhalation: Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
In case of skin contact: Wash immediately with: Water Do not wash with: Solvents/Thinner.
After eye contact: In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
After ingestion: Rinse mouth thoroughly with water. Call a physician in any case! Do NOT induce vomiting.
Fire-fighting measures
Suitable extinguishing media: alcohol resistant foam. Extinguishing powder.
Unsuitable extinguishing media: Strong water jet. Water mist.
In case of fire may be liberated: Carbon dioxide (CO2) Carbon monoxide (CO).
Advice for firefighters: Do not inhale explosion and combustion gases. Use water spray jet to protect personnel and to cool endangered containers. Do not allow run-off from fire-fighting to enter drains or water courses.
Special protective equipment for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing.
Unsuitable extinguishing media: Strong water jet. Water mist.
In case of fire may be liberated: Carbon dioxide (CO2) Carbon monoxide (CO).
Advice for firefighters: Do not inhale explosion and combustion gases. Use water spray jet to protect personnel and to cool endangered containers. Do not allow run-off from fire-fighting to enter drains or water courses.
Special protective equipment for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental release measures
Personal precautions, protective equipment and emergency procedures: Special danger of slipping by leaking/spilling product. Do not breathe gas/fumes/vapour/spray. Provide adequate ventilation. Remove persons to safety.
Environmental precautions: Ensure all waste water is collected and treated via a waste water treatment plant. In case of entry into waterways, soil or drains, inform the responsible authorities.
Methods and material for containment and cleaning up: Suitable material for taking up: Sand, Kieselguhr, Universal binder, Sawdust. Collect in closed and suitable containers for disposal.
Environmental precautions: Ensure all waste water is collected and treated via a waste water treatment plant. In case of entry into waterways, soil or drains, inform the responsible authorities.
Methods and material for containment and cleaning up: Suitable material for taking up: Sand, Kieselguhr, Universal binder, Sawdust. Collect in closed and suitable containers for disposal.
Handling and storage
Precautions for safe handling: Provide adequate ventilation as well as local exhaustion at critical locations. When using do not eat, drink, smoke, sniff. Wash hands before breaks and after work. All work processes must always be designed so that the following is as low as possible: eye contact, skin contact. In case of entry into waterways, soil or drains, inform the responsible authorities. Wear personal protection equipment.
Technical measures and storage conditions: Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity. Never use pressure to empty container.
Technical measures and storage conditions: Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity. Never use pressure to empty container.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
When using do not eat, drink, smoke, sniff. Wash hands before breaks and after work.
Provide adequate ventilation as well as local exhaustion at critical locations. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Eye/face protection: Eye glasses with side protection
Skin protection: Hand protection
Gloves: The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. Breakthrough times and swelling properties of the material must be taken into consideration.
Suitable material : Butyl caoutchouc (butyl rubber); Required properties : >480 min.; Thickness of the glove material : 1.00 mm.; Body protection: Overall
Respiratory protection: Respiratory protection necessary at exceeding exposure limit values or insufficient ventilation insufficient exhaust
Handling larger quantities. Container device with compressed air (DIN EN 137) / Filtering device (full mask or mouthpiece) with filter: Filter types:A, B, E, K. Class 1: Maximum permitted contaminant concentration in inhaled air = 1000 mL/m3 (0.1 % by vol.); class 2: maximum permitted contaminant concentration in inhaled air = 5000 mL/m3 (0.5 % by vol.); class 3: maximum permitted contaminant concentration in inhaled air = 10000 mL/m3 (1.0 % by vol.)
Environmental exposure controls: Send to a hazardous waste incinerator facility under observation of official regulations.
Provide adequate ventilation as well as local exhaustion at critical locations. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Eye/face protection: Eye glasses with side protection
Skin protection: Hand protection
Gloves: The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. Breakthrough times and swelling properties of the material must be taken into consideration.
Suitable material : Butyl caoutchouc (butyl rubber); Required properties : >480 min.; Thickness of the glove material : 1.00 mm.; Body protection: Overall
Respiratory protection: Respiratory protection necessary at exceeding exposure limit values or insufficient ventilation insufficient exhaust
Handling larger quantities. Container device with compressed air (DIN EN 137) / Filtering device (full mask or mouthpiece) with filter: Filter types:A, B, E, K. Class 1: Maximum permitted contaminant concentration in inhaled air = 1000 mL/m3 (0.1 % by vol.); class 2: maximum permitted contaminant concentration in inhaled air = 5000 mL/m3 (0.5 % by vol.); class 3: maximum permitted contaminant concentration in inhaled air = 10000 mL/m3 (1.0 % by vol.)
Environmental exposure controls: Send to a hazardous waste incinerator facility under observation of official regulations.
Stability and reactivity
Exothermic reaction with oxidising agents, strong acids and strong alkali possible.
Decomposition to Carbon dioxide (CO2) and Carbon monoxide (CO).
Decomposition to Carbon dioxide (CO2) and Carbon monoxide (CO).
Disposal considerations
Send to a hazardous waste incinerator facility under observation of official regulations. Clean IBCs or drums at approved facility only. Contaminated packages must be completely emptied and can be re-used following proper cleaning. Packing which cannot be properly cleaned must be disposed of. Handle contaminated packages in the same way as the substance itself.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
