Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 483-360-5 | CAS number: 114435-02-8
Boiling point
Administrative data
Link to relevant study record(s)
- Endpoint:
- boiling point
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 25 January 2005 to 12 May 2005
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- GLP compliance
- Qualifier:
- according to guideline
- Guideline:
- other: ASTM E537-86
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 103 (Boiling Point)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.2 (Boiling Temperature)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- (2 December 2002)
- Type of method:
- differential scanning calorimetry
- Specific details on test material used for the study:
- PROCEDURE
- Sample:
Aliquots (0.0056 g and 0.0066 g) of test material were placed in aluminium crucibles, which had been
scratched with a needle to aid crystallisation.
- Analysis:
The DSC parameters were as follows:
Calorimeter: Mettler Toledo DSC822e
ThermoHaake Cooler EK45/MT
Temperature program:
* initial: 25.0°C
* rate: 20.0°C/min
* final: 400.0°C
Atmosphere: air (static)
The temperature accuracy of the DSC was assessed using an indium reference standard (purity*99.999%). The melting temperature was determined to be 156.7°C and within the defined tolerance (156.6 ± 0.5°C). The DSC was therefore considered acceptable for use.
- Calculation:
Measured temperatures were converted from °C to K using the following equation:
T = t + 273.15
where T = temperature (K) and t = temperature (°C) - Key result
- Boiling pt.:
- 211.61 °C
- Atm. press.:
- 101.92 kPa
- Conclusions:
- The boiling temperature of the test material has been determined to be 485 ± 0.5 Kat 101.92 kPa.
- Executive summary:
The determination of the boiling point of Monofluoroethylene carbonate was performed by differential scanning calorimetry (DSC) according to ASTM E537 -86, OECD Guideline n°103 and EU Method A.2, under GLP conditions. The result was: 211.61°C at 101.92 kPa.
Reference
Table 1: Thermographic Data - Determination 1
Thermal Event |
Interpretation |
Temperature |
|
°C |
K |
||
Endotherm |
Boiling temperature |
211.61 |
485 |
Atmospheric pressure: 101.92 kPa
Table 2: Thermographic Data - Determination 2
Thermal Event |
Interpretation |
Temperature |
|
°C |
K |
||
Endotherm |
Boiling temperature |
211.61 |
485 |
Atmospheric pressure: 101.92 kPa
Mean boiling temperature: 485 ± 0.5 K
Description of key information
The boiling temperature of the test material has been determined to be 485 ± 0.5 K at 101.92 kPa.
Key value for chemical safety assessment
- Boiling point at 101 325 Pa:
- 211.61 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
