Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General information:

Take persons to a safe place. Observe self-protection for first aid. Seek medical advice in the event of contact with this substance.

After contact with the eyes:

Rinse immediately with plenty of water for 10-15 minutes. Keep eyelids well open to rinse the whole eye surface and eyelids with

water. Seek medical advice and clearly identify substance.

After contact with the skin:

Remove contaminated or soaked clothing. Wash off with plenty of water or water and soap immediately for 10-15 minutes. In

serious cases, use emergency shower immediately. Seek medical advice and clearly identify substance.

After inhalation:

Keep the patient calm. Protect against loss of body heat. Seek medical advice and clearly identify substance.

After swallowing:

If conscious, give several small portions of water to drink. Do not induce vomiting. Seek medical advice and clearly identify

substance.

Most important symptoms and effects, both acute and delayed

Any relevant information can be found in other parts of this section.

Indication of any immediate medical attention and special treatment needed

Further toxicology information must be observed.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media:

water mist , extinguishing powder , alcohol-resistant foam , carbon dioxide , sand .

Extinguishing media which must not be used for safety reasons:

water jet .

Special hazards arising from the substance or mixture

Risk of hazardous gasses or fumes in the event of fire. Exposure to combustion products may be a health hazard! Hazardous

combustion products: carbon oxides , silicon oxides , incompletely burnt hydrocarbons , toxic and very toxic fumes .

Advice for firefighters

Special protective equipment for fire fighting:

Use respiratory protection independent of recirculated air. Keep unprotected persons away.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Secure the area. Wear personal protection equipment. Keep unprotected persons away. Avoid contact with eyes

and skin. Do not inhale gases/vapours/aerosols. If material is released indicate risk of slipping. Do not walk through spilled

material.

Environmental precautions

Prevent material from entering surface waters, drains or sewers and soil. Close leak if possible without risk. Contain any fluid that

runs out using suitable material (e.g. earth). Retain contaminated water/extinguishing water. Dispose of in prescribed marked

containers. Inform authorities if substance leaks into surface waters, sewerage or ground.

Methods and material for containment and cleaning up

Take up mechanically and dispose of according to local/state/federal regulations. Do not flush away with water. For small

amounts: Absorb with a neutral (non-acidic / non-basic) liquid binding material such as diatomaceous earth and dispose of

according to government regulations. For large amounts: Liquids may be recovered using suction devices or pumps. If flammable,

only air driven or properly rated electrical equipment should be used. Clean any slippery coating that remains using a detergent /

soap solution or another biodegradable cleaner. Silicone fluids are slippery; spills are a safety hazard. Apply sand or other inert

granular material to improve traction.

Further information:

Exhaust vapours. Eliminate all sources of ignition. Consider explosion protection.

Reference to other sections

Relevant information in other sections has to be considered. This applies in particular for information given on personal protective

equipment and on disposal.

Handling and storage

Precautions for safe handling

Precautions for safe handling:

Ensure adequate ventilation. Must be syphoned off in situ. Spilled substance increases risk of slipping. Avoid formation of

aerosols. In case of aerosol formation special protective measures are required (exhausting by suction, respiratory protection).

Observe information in section 8. Keep away from incompatible substances in accordance with section 10.

Precautions against fire and explosion:

Product may release ethanol. Flammable vapors may accumulate and form explosive mixtures with air in containers, process

vessels, including partial, empty and uncleaned containers and vessels, or other enclosed spaces. Keep away from sources of

ignition and do not smoke. Take precautionary measures against electrostatic charging. Cool endangered containers with water.

Conditions for safe storage, including any incompatibilities

Conditions for storage rooms and vessels:

Observe local/state/federal regulations.

Advice for storage of incompatible materials:

Observe local/state/federal regulations.

Further information for storage:

Store in a dry and cool place. Protect against moisture. Store container in a well ventilated place.

Transport information

Land transport (UN RTDG/ADR/RID)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not regulated for transport

Inland waterway transport (UN RTDG/ADN(R))

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not regulated for transport

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not regulated for transport.
Bulk transport in tankers is not intended.

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not regulated for transport
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Maximum airborne concentrations at the workplace:

CAS No.       Material       Type       mg/m3       ppm

110-91-8       Morpholine       AGW       36,0       10,0

64-17-5       Ethanol       AGW       960,0       500,0

Exposure controls

Respiratory protection

In case of long or strong exposure: gas mask filter ABEK .

Eye protection

tight fitting protective goggles .

Hand protection

Protective gloves made of butyl rubber . Gloves suitable for up to 60 minutes' use. The selection of appropriate gloves not only

depends on the material, but also on other quality characteristics, and may vary depending on the manufacturer. Please observe

information from your glove supplier in terms of permeability and breakthrough time.

Skin protection

protective clothing .

Exposure to the environment limited and controlled

Prevent material from entering surface waters, drains or sewers and soil.

General protection and hygiene measures:

Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols. Do not eat, drink or smoke when handling.

Personal protection equipment:

Stability and reactivity

Reactivity; Chemical stability; Possibility of hazardous reactions

If stored and handled in accordance with standard industrial practices no hazardous reactions are known.

Relevant information can possibly be found in other parts of this section.

Conditions to avoid

moisture , Heat, open flames, and other sources of ignition.

Incompatible materials

Reacts with: water , basic substances and acids Reaction causes the formation of: . ethanol .

Hazardous decomposition products

N-methylmorpholine , ethanol .

Disposal considerations

Waste treatment methods

Material

Recommendation:

Material that cannot be used, reprocessed or recycled should be disposed of in accordance with Federal, State, and local

regulations at an approved facility. Depending on the regulations, waste treatment methods may include, e.g., landfill or

incineration.

Uncleaned packaging

Recommendation:

Completely discharge containers (no tear drops, no powder rest, scraped carefully). Containers may be recycled or re-used.

Observe local/state/federal regulations. Uncleaned packaging should be treated with the same precautions as the material.

Waste Disposal Legislation Ref.No.(EC)

It is not possible to determine a waste code for this product in accordance with the European Waste Catalogue (EWC) since it is

only possible to classify it according to how it is used by the customer. The waste code is to be determined within the EU in liaison

with the waste-disposal operator.