Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-890-7 | CAS number: 503614-91-3
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Between 20 February and 21 February 2012.
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Version / remarks:
- using a procedure designed to be compatible with Method A10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30 May 2008.
- Deviations:
- no
- GLP compliance:
- yes
- Test procedure:
- burning rate test: preliminary screening test
- Remarks on result:
- substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
- Interpretation of results:
- non flammable
- Conclusions:
- The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.
- Executive summary:
The flammability (solids) was determined by measuring the burning rate of test item prepared as a pile of set dimensions. Testing was conducted using a procedure designed to be compatible with Method A10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30 May 2008. The flammability (solids) were determined by measuring the burning rate of the test item. A mould (250 mm long x 20 mm wide x 10 mm high) was loosely filled with test item (tested as received). A non-combustible, non-porous board was placed onto the mould which was then inverted. The mould was removed and an air-rich Bunsen burner flame applied to one end of the pile for two minutes.
Conclusion
The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.
Reference
Results
Preliminary Screening Test
The pile failed to ignite during the 2 minutes that the Bunsen flame was applied.
The result of the preliminary screening test obviated the need to perform the main test.
Description of key information
The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
Justification for classification or non-classification
The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test. Therefore it does not meet the criteria for classification as a flammable solid as set out in 1272/2008/EC (amended).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
