Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 204-466-8 | CAS number: 121-34-6
Guidance on Safe Use
Administrative data
First-aid measures
General advice
- Show this safety data sheet to the doctor in attendance.
- First aider needs to protect himself.
- Place affected clothing in a sealed bag for subsequent decontamination.
In case of inhalation
- Move to fresh air.
In case of skin contact
- Take off contaminated clothing and shoes immediately.
- Wash off with soap and water.
- Consult a physician if necessary.
In case of eye contact
- Rinse with running water whilst keeping the eyes wide open (at least 15 minutes)
In case of ingestion
- Do NOT induce vomiting.
- Rinse mouth with water.
- If symptoms persist, call a physician.
Fire-fighting measures
Suitable extinguishing media
- powder
- Foam
- Aqueous film forming foam (AFFF).
- Sand
Unsuitable extinguishing media
- None known.
- Use extinguishing measures that are appropriate to local circumstances and the surrounding environment
Special hazards arising from the substance or mixture
- Harmful or toxic vapours are released.
- Combustible solid.
- Risk of dust explosion.
Special protective equipment for firefighters
- Full protective suit
- Self-contained breathing apparatus (EN 133)
Specific fire fighting methods
- Evacuate personnel to safe areas.
- Avoid release to the environment.
- Wear suitable protective equipment.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
- Do not breathe dust.
- Avoid contact with the skin and the eyes.
- Personal protective equipment
- Respiratory protection
- Wear suitable gloves.
- Safety glasses
- Signal word
- Mark the contaminated area with signs and prevent access to unauthorized personnel.
- Dam up.
- Should not be released into the environment.
Recovery
- Keep in properly labelled containers.
Disposal
- Treat recovered material as described in the section "Disposal considerations".
Handling and storage
Precautions for safe handling
- Provide adequate ventilation.
Technical measures/Storage conditions
- The floor of the depot should be impermeable and designed to form a water-tight basin.
- Stable under normal conditions.
- Keep away from incompatible materials to be indicated by the manufacturer
- Keep away from: Strong reducing agents., Strong oxidizing agents, Alkalis and caustic products., Acid chlorides and
anhydrides.
Packaging material
Suitable material
- Polyethylene
- drum
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not regulated
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not regulated
Shipping information
- Proper shipping name and description:
- Not regulated
- Chemical name:
- Not regulated
- Labels:
- Not regulated
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not regulated
Shipping information
- Proper shipping name and description:
- Not regulated
- Chemical name:
- Not regulated
- Labels:
- Not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Engineering measures
- Effective exhaust ventilation system
Respiratory protection
- Use a respirator with an approved filter if a risk assessment indicates this is necessary.
- In the event of insufficient ventilation:
- Combined respiratory protective device, for filtering gas and particles, with an ABEK canister.
Hand protection
- PVC gloves
Eye protection
- Safety glasses with side-shields
Skin and body protection
- Full protective suit
Hygiene measures
- Handle in accordance with good industrial hygiene and safety practice.
Protective measures
- The protective equipment must be selected in accordance with current CEN standards and in cooperation with the
supplier of the protective equipment.
- Selection of appropriate personal protective equipment should be based on an evaluation of the performance
characteristics of the protective equipment relative to the task(s) to be performed, conditions present, duration of
use, and the potential hazards and/or risks that may occur during use.
- Handle in accordance with good industrial hygiene and safety practice.
Environmental exposure controls
- Dam up.
- Should not be released into the environmen
Stability and reactivity
Stable under normal conditions.
Incompatible materials
- Reacts with the following substances:
- Strong reducing agents.
- Strong oxidizing agents
- Acid chlorides
- Alkalis and caustic products.
Hazardous decomposition products
- On combustion forms:
- Toxic Gas
- Carbon oxides
Disposal considerations
Product Disposal
- Should not be released into the environment.
- Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.
Advice on cleaning and disposal of packaging
- Clean using hot water and a deodorizing agent.
- Following decontamination, re-use or recycle metal packaging.
- Dispose of in accordance with local regulations.
Measure for waste avoidance or recovery
- Do not dispose of with domestic refuse.
- Land-fill is forbidden.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
