Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 306-060-7 | CAS number: 95873-69-1
Flammability
Administrative data
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- March 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- GLP compliance:
- yes
Test material
- Reference substance name:
- Sodium [(6-hydroxy-4-methyl-2-oxo-2H-1-benzopyran-7-yl)oxy]acetate
- EC Number:
- 306-060-7
- EC Name:
- Sodium [(6-hydroxy-4-methyl-2-oxo-2H-1-benzopyran-7-yl)oxy]acetate
- Cas Number:
- 95873-69-1
- Molecular formula:
- C12H10O6.Na
- IUPAC Name:
- sodium [(6-hydroxy-4-methyl-2-oxo-2H-1-benzopyran-7-yl)oxy]acetate
- Test material form:
- solid: particulate/powder
- Details on test material:
- Batch 44034
Description: Cream to light grey powder
Expiry date: 30 November 2019
Storage conditions: Controlled room temperature (15-25 ºC, below 70 RH%).
Constituent 1
Results and discussion
Flammable solids
- Key result
- Test procedure:
- other: The test item could not be ignited just charred
- Remarks on result:
- other: The test item could not be ignited just charred
Any other information on results incl. tables
Preparations Before the Test:
The sample was filled into a mould. Then the mould was dropped three times from a height of 2 cm onto a solid surface and the mould was filled up again. The lateral limitations were removed and the excess substance scraped off. A non-combustible and non-porous plate was placed on top of the mould. This was inverted and the mould removed.
Preliminary Test:
The flame from a gas burner was applied to one end of the powder train until the powder ignited or for a maximum of 2 minutes if there is no ignition. The test was performed two times.
Main Test:
Based on the results of the preliminary test no further testing was required.
RESULT:
In the preliminary test the test itemcould not be ignited just charred. Based on the results of the preliminary test, no main test was performed.
Applicant's summary and conclusion
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- The test item could not be ignited just charred. Therefore, the substance is considered not to be highly flammable.
- Executive summary:
Two parallel flammability tests were performed. The tests were negative.
The test item is not highly flammable in the conditions of this test.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
