Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 461-080-4 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Inhalation: Remove from exposure to fresh air, treat symptomatically.
Obtain medical advice as necessary.
Eyes: Flush immediately with water for at least 15 minutes while
holding eyelids open. If irritation persists, repeat
flushing. Get immediate medical attention.
Skin: Immediately flush with plenty of water. If symptoms persist
call a physician.
Ingestion: Do not induce vomiting without medical advice. If conscious,
wash out mouth and give water to drink. Get medical
attention.
Fire-fighting measures
Recommended extinguishing agent: The substance would not be expected to burn unless all the
water has boiled away. Keep containers cool by spraying with
water.
Recommended extinguising media: carbon dioxide, water spray
and dry powder.
Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon and
nitrogen). However, there is no experimental evidence to
support the anticipated combustion products.
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Accidental release measures
Emergency measures in case of spillage:
Personal precautions:
Restrict access to area as appropriate until clean-up
operations are complete. Ensure clean-up is conducted by
trained personnel only. Ventilate spill area if possible. Do
not touch spilled material. Stop or reduce any leaks if it
is safe to do so.
Wear standard protective clothing for example nitrile or PVC
gauntlet gloves and chemical splash goggles. If significant
mists or aerosols are generated a full-face respirator with
an organic vapour cartridge with a dust/mist pre-filter or
supplied air be used. If respiratory protection is required
institute a complete respiratory protective program
including selection, fit testing, maintenance and inspection
.
Notify appropriate government, occupational health and
safety and environmental authorities.
Methods for cleaning up:
Small spills: Soak up with absorbent material. Place
residues in a suitable, covered, properly labelled
container. Wash affected area.
Large spills: Contain liquid using absorbent material, by
digging trenches or by diking. Reclaim into recovery or
salvage drums or tank truck for proper disposal. Wash site
of spillage thoroughly with water. Contact an approved waste
hauler for disposal of contaminated recovered material.
Dispose of material in compliance with local regulations.
Environmental precautions:
Do not contaminate surface water. If drains, streams, soil or sewers become contaiminated, notify local authority.
Handling and storage
Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.
Engineering controls are necessary to reduce exposure to the
substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical resistant clothing to Standard EN368
Eye protection to Standard EN166
When necessary appropriate respiratory protection should be
used.
The standards mentioned above should be regarded as a
minimum.
Storage: Store in a cool, dry, well-ventilated area in suitably
labelled containers.
Keep containers tightly closed when not in use.
Packaging of the substance and or preparation: UN approved containers.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- None.
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- None.
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- None.
Shipping information
- Proper shipping name and description:
- None.
- Chemical name:
- None.
- Labels:
- None.
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- None.
Shipping information
- Proper shipping name and description:
- None.
- Chemical name:
- None.
- Labels:
- None.
Special provisions / remarks
- Remarks:
- Transport code: None
Transport: Avoid crushing containers. In the event of a spillage, observe the warning labels on the container.
The substance is not regulated during transportation.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Use of engineering controls, such as closed systems and general ventilation with local exhaust ventilation will minimise potential expousre.
Where there is potential for exposure this is prevented by use of appropriate PPE and RPE. Good industrial practices and hygiene will also minimise any potential expousre.
Stability and reactivity
Stability: Stable under normal conditions of use.
Hazardous polymerisation: Will not occur.
Conditions to avoid: Extremes of temperature.
Materials to avoid: Strong bases, contact with stong oxidisers may generate heat, fires, explosions and/or toxic vapours.
Hazardous decomposition products: Oxides of carbon and nitrogen.
Dust explosion: Not applicable as the substance is a liquid.
Danger other than fire: None known
Chemical reaction with water: None
Disposal considerations
Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of release to the waste water treatment plant. In
principle, it may be possible to recover larger spillages of
uncontaminated material for subsequent use.
Industry - Possibility of neutralisation: None known.
Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages mixed with inert
material (eg sand or soil) may be disposed of by landfill at
an authorised tip in accordance with local regulations.
Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon and
nitrogen oxides) could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be
unlikely.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
