Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Using appropriate personal protective equipment, move
exposed subject to fresh air. If breathing is difficult or
ceases, ensure and maintain ventilation. Give oxygen as
appropriate. The exposed subject should be kept warm and at
rest. Obtain medical attention in cases of known or possible
over exposure, or with symptoms including chest pain,
difficulty breathing, loss of consciousness or other adverse
effects, which may be delayed.
Emergency measure - Eyes: Wash immediately with clean and gently flowing water.
Continue for at least 15 minutes. Obtain medical attention.
Emergency measure - Skin: Using appropriate personal protective equipment, remove
contaminated clothing and flush exposed area with large
amounts of water. Obtain medical attention if skin reaction
occurs, which may be immediate or delayed.
Emergency measure - Ingestion: Never attempt to induce vomiting. Do not attempt to give any
solid or liquid by mouth if the exposed subject is
unconscious or semi-conscious. Wash out the mouth with
water. If the exposed subject is fully conscious, give
plenty of water to drink. Obtain medical attention.

Fire-fighting measures

Recommended extinguishing agent: No special requirements needed. Water is recommended for
fires involving packaging.

Product arising from burning: The substance is combustible and will burn if involved in
a fire, evolving noxious fumes (eg carbon oxides).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Personal Precautions:

Fence or cordon the affected area and do not allow
individuals to touch or walk through the spilled material
unless wearing appropriate protective clothing. Avoid dust
generation.


Environmental Precautions:

Prevent entry into waterways, sewers, surface drainage
systems and poorly ventilated areas. If spill is outdoors,
cover with a plastic sheet to minimise spreading or contact
with rain.


Clean-up Methods:

Collect and place in a suitable, properly labelled container
for recovery or disposal. After all solid or absorbent
material has been collected, the area should be vacuumed
with HEPA filter-equipped apparatus.


Decontamination Procedures:

No specific decontamination or detoxification procedures
have been identified for this material. Consider use of
water, detergent solutions, or other soluble solvents, for
clean-up decontamination operations.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


General Requirements:

Avoid dispersion as a dust cloud.


Depending upon the scale of operation, the use of

appropriate exhaust ventilation is recommended to provide
routine control of fire and explosion hazards during
handling of this material.


Ignition Controls:

Bond and earth (ground) all plant equipment to ensure that
no isolated conductors are present. Isolated conductors can
accumulatee sufficient electrostatic charge to produce
discharges of many hundreds of milli-Joules.

Storage: Keep in tightly closed containers or packages away from
moisture and from sources of ignition.


Avoid prolonged storage at elevated temperatures (greater
than room temperature, approximately 20°C).

Packaging of the substance and or preparation: Double polythene lined fibreboard kegs.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: None.
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None which is hazardous.

Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not
economically or technically feasible, and such waste
material will be disposed of by incineration or landfill. In
principle, it may be possible to recover larger

spillages of uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is not
classified at the VIIC level of notification.



The dust hazard will be minimised by appropriate handling
and storage.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon
oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly
tothe sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None known.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: None known.