Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General information:
Instantly remove any clothing soiled by the product.
In case of accident or if you fell unwell, seek medical advice immediately.
After inhalation:
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
In case of unconsciousness bring patient into stable side position for transport.
After skin contact:
Remove any clothing and shoes soiled by the product.
If skin irritation continues, consult a doctor.
Immediately wash with water and soap and rinse thoroughly
After eye contact:
Rinse opened eye for at least 15 minutes under running water. Get medical attention if irritation occurs.
After swallowing:
Rinse out mouth and then drink plenty of water.
Do not induce vomiting; instantly call for medical help.
Seek medical advice immediately and show this container or label.

Fire-fighting measures

Suitable extinguishing agents:
CO2, extinguishing powder or water jet. Fight larger fires with water jet.
Use fire fighting measures that suit the environment.
For safety reasons unsuitable extinguishing agents: Water with a full water jet.
Special hazards arising from the substance:
In case of fire: soot, carbon monoxide and carbon dioxide
Advice for firefighters:
· Protective equipment: Wear self-contained breathing apparatus.
· Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear protective equipment. Keep unprotected persons away.
Avoid contact with eyes and skin.
All persons whose presence is not necessary, remove from exposure.
Environmental precautions:
Do not allow to enter drainage system, surface or ground water.
Do not allow to enter the ground/soil.
Methods and material for containment and cleaning up:
Use neutralising agent.


Handling and storage

Precautions for safe handling
Carry out filling operations only at sites with extractors available.
Open and handle container with care.
Avoid contact with eyes and skin.
Information about protection against explosions and fires: No special measures required.
Conditions for safe storage, including any incompatibilities:
Requirements to be met by storerooms and containers:
Use only containers specifically permitted for this substance/product.
Country-specific requirements for the storage of low water-polluting substances have to be aware.
Information about storage in one common storage facility: Store away from oxidising agents.
Further information about storage conditions:
Store under dry conditions.
Keep container tightly sealed.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
Labels:
Not regulated
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Labels:
Not regulated
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated
Shipping information
Proper shipping name and description:
Not regulated
Chemical name:
Not regulated
Labels:
Not regulated
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated
Shipping information
Proper shipping name and description:
Not regulated
Chemical name:
Not regulated
Labels:
Not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective and hygienic measures
The usual precautionary measures should be adhered to in handling the chemicals.
Keep away from foodstuffs, beverages and food.
Instantly remove any soiled and impregnated garments.
Wash hands during breaks and at the end of the work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Do not eat or drink while working.
· Breathing equipment: Filter P2.
· Protection of hands: Protective gloves according to EN 388, e.g. ProFit 091
Material of gloves:
Nitrile rubber, NBR
PVC gloves
Penetration time of glove material Protective gloves should be replaced at first signs of wear.
Eye protection:
Tightly sealed safety glasses.
Safety glasses with side shields.
Body protection:
Safety shoes according to DIN ISO 20345 protection class S3
suitable protective clothing

Stability and reactivity

Reactivity: No additinal information available
Chemicla Stability: Not established
Conditions to avoid: Direct sunlight. Extremely high or low temperatures.
Incompatible materials: Strong acids, strong bases and oxidation agents.

Disposal considerations

Dispose in accordance with corresponding regulations. Disposal of defect or damaged product is performed in accordance with instruction from manufacturer or in accordance with local regulation. Disposal may be performed only by the authorized person. For the classification of waste and its removal corresponding to the waste producer.
Avoid release to the environment

Categories Display