Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove victim to fresh air. Keep warm and quiet. Give
artificial respiration if not breathing. Seek medical
attention.
Emergency measure - Eyes: Flush eyes with water for at least 15 minutes repeatedly,
holding eyelids open to ensure proper irrigation. Seek
medical attention.
Emergency measure - Skin: Wash affected area with soap and plenty of water. Launder
contaminated clothing before re-use.
Emergency measure - Ingestion: Seek medical attention immediately.

Fire-fighting measures

Recommended extinguishing agent: Carbon dioxide, dry chemical or foam extinguishers should be
used.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon, nitrogen and
sulphur oxides). However, there is no experimental evidence
to support the anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.


Absorb spillages with a suitable inert material (eg sand or
soil). Carefully transfer the spillage to waste containers,
or use an industrial vacuum machine. Containers filled with
waste material must be labelled in the same way as the
original containers.


Clean the spillage area with water and detergent.


Dispose of waste material by incineration or landfill in
accordance with local regulations.

Handling and storage

Handling: The substance should be handled and used in conditions of
good industrial hygiene and in conformity with any local
regulations in order to avoid exposure by inhalation or
dermal exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipmemt should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard prEN166


When necessary appropriate respiratory protection should be
used. e.g.an organic vapour mask conforming to EN405 ffA1.


The standards mentioned above should be regarded as a
minimum.

Storage: Store in a cool, dry, well-ventilated area.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 55 gallon lined steel drum.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None
Transport: None
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: No dust explosion hazard is anticipated as the neat
substance is a liquid at normal temperatures and pressures.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Handling of the substance will be by trained operators and
will be kept to a minimum. When formulated into a lubricant,
the substance is metered into a closed vessel.


In principle, it may be possible to recover larger spillages
of uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is a
skin sensitiser. No chemical treatment is practicable to
neutralise this hazardous health property.


No chemical treatment is practicable to neutralise the
hazardous environmental properties of the substance.


None known.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon,
nitrogen and sulphur oxides and other nitrogen and sulphur
containing compounds) could be formed.

Industry - Possibility of destruction - water purification: The substance should not be discharged directly to the
sewage system or the aqueous environment. Effects on sewage
treatment systems are unknown although the substance has
been shown to be substantially biodegradable.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.