Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Move exposed person to fresh air; in case of indisposition
seek medical advice.
Emergency measure - Eyes: Rinse with plenty of water; if irritation occurs, seek
medical advice
Emergency measure - Skin: Wash with soap and water
Emergency measure - Ingestion: Symptomatic treatment; in case of indisposition seek medical

Fire-fighting measures

Recommended extinguishing agent: Water, dry powder, foam

Product arising from burning: Combustion products may contain carbon, and nitrogen oxide
as well as fluorinated derivatives

Product determined by test: N

Protective equipment: Wear self contained breathing apparatus

Accidental release measures

Emergency measures in case of spillage: Avoid skin and eye contact. Don't inhale dust. Wear
appropriate personal protective equipment (see section

Solids: sweep up avoiding formation of dust (wet powders
with water or use an approved industrial vacuum cleaner)

and place in suitable according to TRGS 201 labelled
containers for disposal. Dispose of waste material in
authorized incineration facilities.

Handling and storage

Handling: Das Einatmen des Stoffes sowie der Haut- und Augenkontakt
sollten vermieen werden. Bei Umfüll- und Dosierarbeiten
sowie bei Probenahmen sollten nach Möglichkeit staubdichte
Vorrichtungen verwendet werden. Beim Umgang in offenen
Systemen sollte möglicher Staub unmittelbar am
Entstehungsort abgesaugt werden. Wenn technische

Absaug- oder Lüftungsmaßnahmen nicht möglich oder
unzureichend sind, sollte Atemschutz (z.B.:::) getragen
werden. Zur Vermeidung von Hautkontakt wird das Tragen von
geprüften Schutzhandschuhen (z.B.:::) empfohlen.

Zur Vermeidung von Augenkontakt wird das Tragen eines
sicheren Augenschutzes (z.B. Schutzbrille) empfohlen.

Die Straßenkleidung sollte getrennt von der Arbeitskleidung
aufbewahrt werden. Bei möglicher Staubentwicklung sollten
wegen der potentiellen Staubexplosionsgefahr potentielle
Zündquellen aus dem Arbeitsbereich entfernt werden. Des
Weiteren sollten Maßnahmen gegen elektrostatische
Aufladungen getroffen werden.


Inhalation of the substance as well as skin and eye contact
should be avoided. If possible, dustproof equipment should
be used during transfer, metering and sampling. In the case
of handling in open systems, any dust that may form should
be extracted directly at the point of origin. If technical
extraction or ventilation measures are not possible or are
insufficient, respiratory protection (e.g. :::) should be
worn. The wearing of tested protective gloves (e.g. :::) is
recommended in order to avoid skin contact. The wearing of
safe eye protection (e.g. goggles) is recommended to avoid
skin contact.

Outdoor clothes should be kept separate from working
clothes. If there is the possibility of dust forming,

due to the potential dust-explosion risk, ignition sources
should be removed from the working area. In addition,
meaasures should be take to prevent static discharge.

Storage: The substance should be stored in well sealed, according to
the regulations labelled and secure containers in adequate
rooms at room temperature. The containers should be secured
against falling down. Avoid residues outside the containers.

Packaging of the substance and or preparation: Adequate plastic containers

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport: Not classified

Transport in well sealed suitable containers. The containers
should be secured against falling down. Label containers in
accordance with pertinent regulations.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Not known

Chemical reaction with water: No dangerous reaction with water

Dust explosion: Not to be expected if handled under good industrial hygiene

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Normal application results in the quantitative consumption
by reaction to the resulting dyestuff.

Industry - Possibility of neutralisation: No suitable method known.

Industry - Possibility of destruction: controlled discharge: Deposit in landfill site.

Industry - Possibility of destruction - incineration: Incineration with flue gas scrubbing.

Industry - Possibility of destruction - water purification: Removal by controlled discharge to a waste water treatment
plant. A purification of the waste water in a waste water
treatment plant is recommended.

If necessary the waste water can be purified prior to the
waste water treatment by membrane filtration or by
floculation with cationic agents or by treatment with ozone.

Industry - Possibility of destruction - other: None

Public at large - Possibility of recovery/recycling: Not applicable