Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 235-849-8 | CAS number: 13007-85-7
Flammability
Administrative data
Link to relevant study record(s)
Description of key information
The substance is not highly flammable, using a procedure designed to be compatible with Method A10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30th May 2008.
Key value for chemical safety assessment
- Flammability:
- non flammable
Additional information
The flammability was determined by measuring the burning rate of test item prepared as a pile of set dimensions. Testing was conducted using a procedure designed to be compatible with Method A10 Flammability of Solids.
A mould 250 mm long x 20mm wide x 10mm high) was loosely filled with test item (tested as received). A non combustible, non-porous board was placed onto the mould which was then inverted. The mould was removed and an air rich Bunsen burner flame applied to one end of the pile for 2 minutes.
If the test item does not ignite and propagate combustion either by burning with a flame or smoldering along 200mm within 4 minutes, the test item is not considered as highly flammable and hence no further testing is required.
If the test item propagates burning of a 200mm length in less than 4 minutes, the main test is performed.
Justification for classification or non-classification
The substance is not highly flammable, using a procedure designed to be compatible with Method A10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30th May 2008.
The test material failed to ignite during the 2 minutes that the Bunsen flame was applied. The results of the preliminary screening test obviated the need to perform the main test and confirmed that the test material should not be classified for flammability.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
