Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-529-7 | CAS number: 107-88-0
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Comparable to guideline study with acceptable restrictions (e.g. non-GLP)
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- ISO 2719 (Determination of flash point - Pensky-Martens closed cup method)
- Version / remarks:
- 2002
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- ASTM D93 (Standard test methods for flash point by pensky-martens closed cup tester)
- Version / remarks:
- 07
- GLP compliance:
- no
- Other quality assurance:
- other: The laboratory complied with a quality management system according to DIN EN ISO 9001 : 2008 and DIN EN ISO 14001 : 2005
- Type of method:
- closed cup
- Remarks:
- MP EN22719A/ ISO2719A
- Key result
- Flash point:
- 115 °C
- Atm. press.:
- 1 013 hPa
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- Flash point (ISO 2719 / ASTMD 93-07) = 115°C at 1013 hPa
- Executive summary:
The flash point for the submission substance was determined according to EU method A.9 using the Pensky-Martens closed cup method according to DIN EN ISO 2719 / ASTMD 93 -07. Two replicate measurements were performed, resulting in a mean flash point of 115°C at 1013 hPa.
Reference
Details on single measurements:
First measurement: 113.5 °C;
Second measurement: 116.5 °C;
Mean value: 115 °C
The correction to ambient pressure (1013 hPa) was accomplished automatically during measurements by the apparatus.
Description of key information
Flash point (DIN-EN-ISO 2719 / ASTM D93-07): 115 °C
Key value for chemical safety assessment
- Flash point at 101 325 Pa:
- 115 °C
Additional information
The flash point for the submission substance was determined according to EU method A.9 using the Pensky-Martens closed cup method according to DIN EN ISO 2719 / ASTMD 93 -07. Two replicate measurements were performed, resulting in a mean flash point of 115°C at 1013 hPa.
The laboratory complied with a quality management system according to DIN EN ISO 9001 : 2008 and DIN EN ISO 14001 : 2005.
Due to a flash point of 115°C, no classification requirements do apply with regard to "flammable liquids".
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
