Registration Dossier

Manufacture, use & exposure

Uses at industrial sites

Documentsopen allclose all

Uses at industrial sites

Contributing activity / technique for the environment
Name of activity / technique:
Exposure from use of coatings at industrial sites
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Processing of coatings/materials at industrial sites in high integrity closed systems with no likelihood of exposure
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of coatings/materials at industrial sites in closed continuous processes with only occasional controlled exposure
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of coatings/materials at industrial sites in closed batch processes with occasional controlled exposure
Process category (PROC):
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of coatings/materials at industrial sites in batch processes (mixing or blending)
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
Application of coatings by spraying under industrial operating conditions - High compressed air use with moderate application rate and spraying in any direction (including upward)
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Application of coatings by spraying under industrial operating conditions - High compressed air use with moderate application rate and spraying only horizontal or downward
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Application of coatings by spraying under industrial operating conditions - No or low compressed air use with moderate application rate and spraying in any direction (including upward)
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Transfer of coatings/materials for charging and discharging at industrial sites without dedicated engineering controls in place (non-dedicated facilities)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Transfer of substance or preparations/mixtures of coatings for charging and discharging at industrial sites using dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Application of coatings by roller, spreader, flow coating under industrial operating conditions
Process category (PROC):
PROC 10: Roller application or brushing
Name of activity / technique:
Application of coatings by dipping under industrial operating conditions
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Application of coatings by pouring under industrial operating conditions
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use of pure substance or preparations/mixtures of coatings in laboratory activities at industrial sites
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 9a: Coatings and paints, thinners, paint removes
Sector of end use:
SU 6a: Manufacture of wood and wood products
SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
SU 16: Manufacture of computer, electronic and optical products, electrical equipment
SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
SU 18: Manufacture of furniture
SU 19: Building and construction work
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 7: Industrial spraying
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 1: Adhesives, sealants
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 18: Ink and toners
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for the environmentopen allclose all
Environmental release category (ERC):
ERC12a: Processing of articles at industrial sites with low release
Environmental release category (ERC):
ERC12b: Processing of articles at industrial sites with high release
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Process category (PROC):
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
Product category used:
PC 1: Adhesives, sealants
PC 9a: Coatings and paints, thinners, paint removes
PC 9b: Fillers, putties, plasters, modelling clay
PC 18: Ink and toners
PC 32: Polymer preparations and compounds
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in a joint CSR

Uses at industrial sites

Contributing activity / technique for the environment
Name of activity / technique:
Exposure from use of printing inks at industrial sites
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Printing of paper in continuous process
Process category (PROC):
PROC 6: Calendering operations
Name of activity / technique:
Transfer of printing inks/materials for charging and discharging at industrial sites without dedicated engineering controls in place (non-dedicated facilities)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Transfer of substance or preparations/mixtures of printing inks into small containers including weighing using dedicated filling lines
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
Use of pure substance or preparations/mixtures of printing inks in laboratory activities at industrial sites
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 18: Ink and toners
Sector of end use:
SU 6b: Manufacture of pulp, paper and paper products
SU 7: Printing and reproduction of recorded media
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Process category (PROC):
PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
Process category (PROC):
PROC 7: Industrial spraying
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Process category (PROC):
PROC 10: Roller application or brushing
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 9a: Coatings and paints, thinners, paint removes
PC 9b: Fillers, putties, plasters, modelling clay
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes

Uses at industrial sites

Contributing activity / technique for the environment
Name of activity / technique:
Exposure from use of adhesives at industrial sites
Environmental release category (ERC):
ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Use of adhesives/materials at industrial sites in closed continuous processes with only occasional controlled exposure
Process category (PROC):
PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
Name of activity / technique:
Use of adhesives/materials at industrial sites in processes with opportunity of exposure (process design does not exclude exposure)
Process category (PROC):
PROC 4: Chemical production where opportunity for exposure arises
Name of activity / technique:
Use of adhesives/materials at industrial sites in batch processes (mixing or blending)
Process category (PROC):
PROC 5: Mixing or blending in batch processes
Name of activity / technique:
Application of adhesives by spraying under industrial operating conditions - High compressed air use with moderate application rate and spraying in any direction (including upward) - RPE required
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Application of adhesives by spraying under industrial operating conditions - No or low compressed air use with moderate application rate and spraying only horizontal or downward - RPE not required
Process category (PROC):
PROC 7: Industrial spraying
Name of activity / technique:
Transfer of substance or preparations/mixtures of adhesives for charging and discharging at industrial sites without dedicated engineering controls in place (non-dedicated facilities)
Process category (PROC):
PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
Name of activity / technique:
Transfer of substance or preparations/mixtures of adhesives for charging and discharging at industrial sites using dedicated facilities
Process category (PROC):
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
Name of activity / technique:
Transfer of substance or preparations/mixtures of adhesives at industrial sites into small containers including weighing using dedicated filling lines
Process category (PROC):
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
Name of activity / technique:
Application of adhesives (low energy) by roller, brush, spreader under industrial operating conditions
Process category (PROC):
PROC 10: Roller application or brushing
Name of activity / technique:
Application of adhesives by dipping under industrial operating conditions
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Application of adhesives by pouring under industrial operating conditions
Process category (PROC):
PROC 13: Treatment of articles by dipping and pouring
Name of activity / technique:
Use of pure substance or preparations/mixtures of adhesives in laboratory activities at industrial sites
Process category (PROC):
PROC 15: Use as laboratory reagent
Product category used:
PC 1: Adhesives, sealants
PC 9b: Fillers, putties, plasters, modelling clay
Sector of end use:
SU 6a: Manufacture of wood and wood products
SU 6b: Manufacture of pulp, paper and paper products
SU 16: Manufacture of computer, electronic and optical products, electrical equipment
SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
SU 18: Manufacture of furniture
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in an own CSR

Uses at industrial sites

Contributing activity / technique for the environment
Name of activity / technique:
Exposure from the industrial production of tyres
Environmental release category (ERC):
ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
Name of activity / technique:
Curing/vulcanisation
Process category (PROC):
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
Name of activity / technique:
Assembly/building and shaping of green tyre - pre-curing activities
Process category (PROC):
PROC 21: Low energy manipulation of substances bound in materials and/or articles
Product category used:
PC 32: Polymer preparations and compounds
Sector of end use:
SU 11: Manufacture of rubber products
SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
Substance supplied to that use in form of:
in a mixture
Subsequent service life relevant for this use:
yes
Related assessment:
use assessed in an own CSR