Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

4.1. Description of first aid measures

Do not leave affected person unattended.

Remove victim out of the danger area.

Provide fresh air.

Remove contaminated, saturated clothing immediately.

After contact with skin, wash immediately with plenty of water and soap.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding

eyelids apart and consult an ophthalmologist.

If swallowed rinse mouth. Do NOT induce vomiting.

4.2. Most important symptoms and effects, both acute and delayed

Observe risk of aspiration if vomiting occurs.

4.3. Indication of any immediate medical attention and special treatment needed

Treat symptomatically.

Fire-fighting measures

5.1. Extinguishing media


Extinguishing powder

Carbon dioxide (CO2)

Avoid full water jet

5.2. Special hazards arising from the substance or mixture

B (Fires of liquids or liquid turning substances).

In case of fire toxic fumes like carbonmonoxide and carbondioxide may be liberated

Burning produces heavy smoke

5.3. Advice for firefighters

Move undamaged containers from immediate hazard area if it can be done safely.

Use suitable breathing apparatus.

Regard to self protection

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Wear personal protection equipment.

Avoid contact with skin, eye and clothing.

Remove all sources of ignition.

Provide adequate ventilation.

Give a warning to persons in the hazard area

6.2. Environmental precautions

Do not allow to enter into surface water or drains.

Cover drains.

Prevent spread over a wide area (e.g. by containment or oil barriers).

6.3. Methods and material for containment and cleaning up

Absorb with liquid-binding material ( e.g. sand, diatomaceous earth, acid- or universal binding agents).

6.4. Reference to other sections

See protective measures under point 7 and 8.

Handling and storage

7.1. Precautions for safe handling

Provide earthing of containers, equipment, pumps and ventilation facilities.

Take precautionary measures against static discharges.

Wear personal protective clothing (see chapter 8).

Do not breathe gas/fume/vapour/spray.

Use only in well-ventilated areas.

When using do not eat, drink, smoke, sniff.

7.2. Conditions for safe storage, including any incompatibilities

Keep container tightly closed in a cool, well-ventilated place.

7.3. Specific end use(s)


Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1. Control parameters

No data available

8.2. Exposure controls

Technical measures and the application of suitable work processes have priority over personal protection


Personal protection equipment:

Respiratory protection:

If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be


Hand protection:

Use sovent and acid resistant protection gloves according to EN 374.

The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific

working place concentration and quantity of hazardous substances.

Take recovery periods for skin regeneration.

Eye protection:

Use protection goggles according to EN166.

Environmental exposure controls

See section 6 and 7

Stability and reactivity

10.1. Reactivity

Avoiding of strong oxidising agents, strong reducing agents, acids, bases, acid anhydride and alkali metals.

10.2. Chemical stability

Product is stable at room temperature.

10.3. Possibility of hazardous reactions

No dangerous reactions expected if used according to specifications.

10.4. Conditions to avoid

Temperatures more than room temperature will benefit the transfer from liquid to vapour phase and

formation of explosive atmospheres.

Storing the product in open containers will benefit the formation of peroxides and derogate the quality.

10.5. Incompatible materials

No data available

10.6. Hazardous decomposition products

No dangerous decomposition products known.

Disposal considerations

13.1. Waste treatment methods

Hazardous waste according to waste regulation

Dispose according to legislation.

Delivery to an approved waste disposal company.

Non-contaminated packages may be recycled.