Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 236-425-5 | CAS number: 13361-34-7
Guidance on Safe Use
Administrative data
First-aid measures
BASF SE, safety data sheet Cyanoacetic acid ethyl hexyl ester crude calculated 100%, 26.09.2008
General advice:
Remove contaminated clothing.
If inhaled:
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
On ingestion:
Rinse mouth and then drink plenty of water.
Note to physician:
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Fire-fighting measures
BASF SE, safety data sheet Cyanoacetic acid ethyl hexyl ester crude calculated 100%, 26.09.2008
Suitable extinguishing media:
water spray, dry extinguishing media, foam
Unsuitable extinguishing media for safety reasons:
water jet
Specific hazards:
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
The degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in accordance with official regulations.
Accidental release measures
BASF SE, safety data sheet Cyanoacetic acid ethyl hexyl ester crude calculated 100%, 26.09.2008
Personal precautions:
Use personal protective clothing.
Environmental precautions:
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.
Methods for cleaning up or taking up:
For large amounts: Pump off product.
For residues: Pick up with suitable absorbent material. Dispose of absorbed material in accordance with regulations.
Handling and storage
BASF SE, safety data sheet Cyanoacetic acid ethyl hexyl ester crude calculated 100%, 26.09.2008
Handling
No special measures necessary provided product is used correctly.
Protection against fire and explosion:
Take precautionary measures against static discharges.
Storage
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
BASF SE, safety data sheet Cyanoacetic acid ethyl hexyl ester crude calculated 100%, 26.09.2008
Personal protective equipment
Respiratory protection:
Suitable respiratory protection for higher concentrations or long-term effect: Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
fluoroelastomer (FKM) - 0.7 mm coating thickness
Polyethylene-Laminate (PE laminate) - ca. 0.1 mm coating thickness
Suitable materials short-term contact and/or splashes (recommended: At least protective index 2, corresponding > 30 minutes of permeation time according to EN 374)
nitrile rubber (NBR) - 0.4 mm coating thickness
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
General safety and hygiene measures:
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is recommended.
Stability and reactivity
BASF SE, safety data sheet Cyanoacetic acid ethyl hexyl ester crude calculated 100%, 26.09.2008
Corrosion to metals: Corrosive effect on: steel
Hazardous reactions:
No hazardous reactions when stored and handled according to instructions.
Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.
Disposal considerations
BASF SE, safety data sheet Cyanoacetic acid ethyl hexyl ester crude calculated 100%, 26.09.2008
Must be dumped or incinerated in accordance with local regulations.
Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
