Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice:
First aid providers should wear personal protective equipment to prevent exposure. Remove contaminated
clothing. Move person to fresh air. If person is not breathing, call 911 or ambulance, then give artificial
respiration, preferably mouth-to-mouth if possible. Call a poison control center or physician for treatment advice.
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
If inhaled:
Remove the affected individual into fresh air and keep the person calm.
If on skin:
Rinse skin immediately with plenty of water for 15 - 20 minutes.
Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes. Remove contact lenses, if present,
after first 5 minutes, then continue rinsing.
If swallowed:
Never induce vomiting or give anything by mouth if the victim is unconscious or having convulsions. Do not
induce vomiting. Have person sip a glass of water if able to swallow.

Fire-fighting measures

Flash point: not applicable
Autoignition: > 150 °C
Lower explosion limit: not determined
Upper explosion limit: not determined
Flammability: not highly
Suitable extinguishing media:
foam, dry powder, carbon dioxide, water spray
Hazards during fire-fighting:
carbon monoxide, carbon dioxide, nitrogen oxides
If product is heated above decomposition temperature, toxic vapours will be released. The substances/groups of
substances mentioned can be released if the product is involved in a fire.
Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
Further information:
Evacuate area of all unnecessary personnel. Contain contaminated water/firefighting water. Do not allow to enter
drains or waterways.

Accidental release measures

Personal precautions:
Take appropriate protective measures. Clear area. Shut off source of leak only under safe conditions. Extinguish
sources of ignition nearby and downwind. Ensure adequate ventilation. Wear suitable personal protective clothing and equipment.
Environmental precautions:
Do not discharge into the subsoil/soil. Do not discharge into drains/surface waters/groundwater. Contain
contaminated water/firefighting water.Cleanup:
Dike spillage. Pick up with suitable absorbent material. Place into suitable containers for reuse or disposal in a
licensed facility. Spilled substance/product should be recovered and applied according to label rates whenever
possible. If application of spilled substance/product is not possible, then spills should be contained, solidified,
and placed in suitable containers for disposal. After decontamination, spill area can be washed with water.
Collect wash water for approved disposal.

Handling and storage

General advice:
Ensure adequate ventilation. Provide good ventilation of working area (local exhaust ventilation if necessary).
Keep away from sources of ignition - No smoking. Keep container tightly sealed. Protect contents from the effects
of light. Protect against heat. Protect from air. Handle and open container with care. Do not open until ready to
use. Once container is opened, content should be used as soon as possible. Avoid aerosol formation. Avoid dust
formation. Provide means for controlling leaks and spills. Do not return residues to the storage containers. Follow
label warnings even after container is emptied. The substance/ product may be handled only by appropriately
trained personnel. Avoid all direct contact with the substance/product. Avoid contact with the skin, eyes and
clothing. Avoid inhalation of dusts/mists/vapours. Wear suitable personal protective clothing and equipment.
Protection against fire and explosion:
The relevant fire protection measures should be noted. Fire extinguishers should be kept handy. Avoid all
sources of ignition: heat, sparks, open flame. Sources of ignition should be kept well clear. Avoid extreme heat.
Keep away from oxidizable substances. Electrical equipment should conform to national electric code. Ground all
transfer equipment properly to prevent electrostatic discharge. Electrostatic discharge may cause ignition.
General advice:
Keep only in the original container in a cool, dry, well-ventilated place away from ignition sources, heat or flame.
Protect containers from physical damage. Protect against contamination. The authority permits and storage
regulations must be observed.
Storage incompatibility:
General advice: Segregate from incompatible substances. Segregate from foods and animal feeds. Segregate
from textiles and similar materials.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not classified as a dangerous good under transport regulations
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not classified as a dangerous good under transport regulations
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not classified as a dangerous good under transport regulations
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection:
Wear respiratory protection if ventilation is inadequate. Wear a NIOSH-certified (or equivalent) TC23C
Chemical/Mechanical type filter system to remove a combination of particles, gas and vapours. For situations
where the airborne concentrations may exceed the level for which an air purifying respirator is effective, or where
the levels are unknown or Immediately Dangerous to Life or Health (IDLH), use NIOSH-certified full facepiece
pressure demand self-contained breathing apparatus (SCBA) or a full facepiece pressure demand supplied-air
respirator (SAR) with escape provisions.
Hand protection:
Chemical resistant protective gloves, Protective glove selection must be based on the user's assessment of the
workplace hazards.
Eye protection:
Safety glasses with side-shields. Tightly fitting safety goggles (chemical goggles). Wear face shield if splashing
hazard exists.
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. head protection, apron,
protective boots, chemical-protection suit.
General safety and hygiene measures:
Wear long sleeved work shirt and long work pants in addition to other stated personal protective equipment.
Work place should be equipped with a shower and an eye wash. Handle in accordance with good industrial
hygiene and safety practice. Personal protective equipment should be decontaminated prior to reuse. Gloves
must be inspected regularly and prior to each use. Replace if necessary (e.g. pinhole leaks). Take off
immediately all contaminated clothing. Store work clothing separately. Hands and/or face should be washed
before breaks and at the end of the shift. No eating, drinking, smoking or tobacco use at the place of work. Keep
away from food, drink and animal feeding stuffs.

Stability and reactivity

Dust explosivity characteristics:
Kst: 231
Minimum ignition energy:
3 - 10 mJ
Conditions to avoid:
Avoid all sources of ignition: heat, sparks, open flame. Avoid extreme temperatures. Avoid prolonged exposure to
extreme heat. Avoid contamination. Avoid electro-static discharge. Avoid prolonged storage. This product may
form an explosive mixture if: 1. the dust is suspended in the atmosphere as a dust cloud AND 2. the
concentration of the dust is above the lower explosion limit (LEL) AND 3. the limiting oxygen concentration (LOC)
is exceeded.
Hazardous reactions:
The product is chemically stable.
Hazardous polymerization will not occur. No hazardous reactions if stored and handled as prescribed/indicated.
Decomposition products:
Hazardous decomposition products: No hazardous decomposition products if stored and handled as
prescribed/indicated., Prolonged thermal loading can result in products of degradation being given off.
Thermal decomposition:
186 °C (DSC (DIN 51007))
Possible thermal decomposition products:
carbon monoxide, carbon dioxide, nitrogen dioxide, nitrogen oxide
Stable at ambient temperature. If product is heated above decomposition temperature toxic vapours may be
released. If product is heated above decomposition temperature hazardous fumes may be released.
Corrosion to metals:
Corrosive effects to metal are not anticipated. Not corrosive to: mild steel

Disposal considerations

Waste disposal of substance:
Do not discharge into drains/surface waters/groundwater. It is the waste generator's responsibility to determine if
a particular waste is hazardous under RCRA. Dispose of in accordance with national, state and local regulations.
Container disposal:
Rinse thoroughly at least three times (triple rinse) in accordance with EPA recommendations. Consult state or
local disposal authorities for approved alternative procedures such as container recycling. Recommend crushing,
puncturing or other means to prevent unauthorized use of used containers.