Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 927-837-2 | CAS number: -
Surface tension
Administrative data
Link to relevant study record(s)
- Endpoint:
- surface tension
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Principles of method if other than guideline:
- - Principle of test:
The objective is to check that Proteol SAV 50S matches with the following definition of organic surface-active agents:
If mixed with water at 20 °C and at a 0.5 % concentration; after one hour at the same temperature:
-the product is a transparent or translucent liquid or a stable emulsion without separation of the insoluble material
-the surface tension of water is lowered to 4.5E-2 N/m (45 dynes/cm) or less.
- Short description of test conditions:
Measures at 20°C +/- 1°C with a platinium plate on the tensiometer KRUSS K12.
- Parameters analysed / observed:
Measures number: 100
Maximum time: 200 s
The experience stopped automatically when the standard deviation is equal to 0 mN/m. - GLP compliance:
- not specified
- Type of method:
- plate method
- Surface tension:
- >= 23.6 - <= 23.7 mN/m
- Temp.:
- 20 °C
- Conc.:
- 5 g/L
- Conclusions:
- PROTEOL SAV 50S at 20°C and at a concentration of 0,5% in water is a transparent liquid and has a surface tension of 23.65 mN/m.
- Executive summary:
PROTEOL SAV 50S at 20°C and at a concentration of 0,5% in water is a transparent liquid and has a surface tension of 23.65 mN/m.
Reference
Description of key information
PROTEOL SAV 50S at 20°C and at a concentration of 0,5% in water is a transparent liquid and has a surface tension of 23.65 mN/m.
Key value for chemical safety assessment
- Surface tension:
- 23.65
- in mN/m at 20°C and concentration in mg/L:
- 5 000
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
