Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
Reaction products of 1-(substitutedphenyl)urea coupled with diazotated potassium sodium substituted-5-{[2-(substituted)ethyl]sulfonyl}benzenesulfonate, further condensed with 2,4,6-trichloro-1,3,5-triazine, further converted with disubstituted benzene-1,4-disulfonic acid in aq. sodium hydroxide
EC number: - | CAS number: -
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- The study was conducted between 23 September 2015 and 02 December 2015
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: GLP guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Parameter:
- lower explosion limit
- Remarks on result:
- other: Not assessed
- Parameter:
- upper explosion limit
- Remarks on result:
- other: Not assessed
- Type of aerosol tested:
- aerosol dispenser: not specified
- Remarks:
- or specified in description of method (migrated information)
- Test parameter:
- ignition distance (cm)
- Remarks:
- original parameter: flame extension (cm) (migrated information)
- Remarks on result:
- other: Not assessed
- Type of aerosol tested:
- aerosol dispenser: not specified
- Remarks:
- or specified in description of method (migrated information)
- Test parameter:
- maximum flame height (cm)
- Remarks:
- original parameter: flame projection (cm) (migrated information)
- Remarks on result:
- other: Not assessed
- Test procedure:
- burning time (test type not further specified)
- Remarks:
- or specified in description of method (migrated information)
- Remarks on result:
- other: Not assessed
- Test procedure:
- ignition time on contact with air
- Remarks:
- Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
- Remarks on result:
- no ignition on contact with air (not further specified)
- Remarks:
- corresponding to 'no' in migrated source record. | Remarks: | Additional remarks: The pile failed to ignite during the 2 minutes that the Bunsen flame was applied.
- Test procedure:
- ignition time on contact with air
- Remarks:
- Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
- Remarks on result:
- no ignition on contact with air (not further specified)
- Remarks:
- corresponding to 'no' in migrated source record. | Remarks: | Additional remarks: The pile failed to ignite during the 2 minutes that the Bunsen flame was applied.
- Remarks on result:
- other: Not assessed
- Interpretation of results:
- non flammable
- Remarks:
- Migrated information
- Conclusions:
- The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.
- Executive summary:
Flammability (Solids). Not highly flammable, using a procedure designed to be compatible with Method A10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30 May 2008.
Reference
Preliminary screening test
The pile failed to ignite during the 2 minutes that the Bunsen flame was applied.
The result of the preliminary screening test obviated the need to perform the main test.
Description of key information
The test item is not highly flammable, using a procedure designed to be compatible with Method A10 Flammability (Solids) of Commission Regulation (EC) No 440/2008 of 30 May 2008.
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
The test item is not highly flammable.
Justification for classification or non-classification
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
