Registration Dossier

Administrative data

First-aid measures

inhalation: Move exposed person to fresh air. Keep person warm and at rest. If not breathing,
if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or
oxygen by trained personnel. Get medical attention if symptoms occur. In case of
inhalation of decomposition products in a fire, symptoms may be delayed. The
exposed person may need to be kept under medical surveillance for 48 hours.

Ingestion: Wash out mouth with water. Move exposed person to fresh air. Keep person warm
and at rest. If material has been swallowed and the exposed person is conscious,
give small quantities of water to drink. Do not induce vomiting unless directed to do
so by medical personnel. Get medical attention if symptoms occur.

Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur.

Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention if irritation occurs.

Protection of first aiders : No action shall be taken involving any personal risk or without suitable training.

Notes to physician: In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.

Fire-fighting measures

Suitable extinguishing media: Use an extinguishing agent suitable for the surrounding fire.

Special exposure hazards: no specific fire or explosion hazards; Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.

hazardous thermal decomposition products: Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
nitrogen oxides

Special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode.

Accidental release measures

personal precautions: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Avoid breathing dust. Put on
appropriate personal protective equipment

Environmental precautions: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).

Small spill: Move containers from spill area. Vacuum or sweep up material and place in a
designated, labelled waste container. Dispose of via a licensed waste disposal
contractor.

large spill: Move containers from spill area. Approach the release from upwind. Prevent entry
into sewers, water courses, basements or confined areas. Vacuum or sweep up
material and place in a designated, labelled waste container. Avoid creating dusty
conditions and prevent wind dispersal. Dispose of via a licensed waste disposal
contractor. Note: see section 1 for emergency contact information and section 13 for
waste disposal.

Handling and storage

handling: Put on appropriate personal protective equipment (see section 8). Eating, drinking
and smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and
smoking. Avoid breathing dust.

Storage: store under cover. Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible
materials and food and drink. Keep container tightly closed and
sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabelled containers.
Use appropriate containment to avoid environmental contamination.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

exposure limit values: No exposure limit value known.

Ocupational exposure control: Use only with adequate ventilation. If user operations generate dust, fumes, gas,
vapour or mist, use process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits.

Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.

Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must
be based on known or anticipated exposure levels, the hazards of the product and
the safe working limits of the selected respirator.

Hand protection: Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Recommended: nitrile rubber,.,PVC Breakthrough Time: <1
hours

Eye protection: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists
or dusts. If operating conditions cause high dust concentrations to be produced,
use dust goggles. Recommended: Tightly-fitting goggles

Skin protection: Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product. Recommended: Protective clothing

Environmental exposure control: Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.

Stability and reactivity

Chemical stability: the product is stable

Possibility of hazardous reaction: Under normal conditions of storage and use, hazardous reactions will not occur.

Conditions/material to avoid: No specific data.

Hazardous decomposition products: Under normal conditions of storage and use, hazardous decomposition products
should not be produced.

Disposal considerations

Methods of disposal: The generation of waste should be avoided or minimised wherever possible. Empty
containers or liners may retain some product residues. This material and its
container must be disposed of in a safe way. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Disposal of this product, solutions
and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional local
authority requirements. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.

Hazardous waste: Within the present knowledge of the supplier, this product is not regarded as
hazardous waste, as defined by EU Directive 91/689/EEC.