Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 946-922-5 | CAS number: -
Endpoint summary
Administrative data
Description of key information
The substance belongs to a group of Natural Complex Substances (NCS) : UVCB sub-type 3, where the source is biological and the process is refinement (See ECHA Guidance on Identification and naming of substances under REACH); such as: exudates, resinoids and concretes that are well-known to be very difficult to analytically assess. These complex UVCB substances contain a large number of constituents with different volatility and solubility (mostly low solubility); the composition can be widely unknown and their physical state ((mostly) solid(ish) and/or extremely viscous resins) leads to further difficulties for testing.
Considering the very complex nature of the test item (UVCB, very viscous/thick liquid, mainly composed of unknown constituents), physico-chemical properties of the registered substance were determined from experimental testing when possible. Some endpoints were waived, based on the experience in handling and use of the substance and on the chemical structure of the known constituents. We also considered waiving based on the technical issues due to the complex nature of such UVCB substance especially when the information obtained from testing was not relevant or of practical use and irrelevant for subsequent assessments.
The substance is a brown-orange thick liquid to highly viscous, very sticky resin at ambient temperature and is flowable at 65°C. It is expected to sink into the water, because of its relative density is 1.0668.
No hazard was identified with regard to physical properties (flammability,explosivity, oxidising properties, self-heating substance) based on Regulation (EC) 1272/2008 (CLP regulation) and GHS.
Additional information
Summary of relevant physico-chemical properties:
Endpoint (method) |
Data |
Appearance at 20 °C and 1 atm. (visual) |
Brown-orange thick liquid to highly viscous, very sticky resin Note: According observations reported in endpoint 4.4, the substance is flowable at approximately 65 °C |
Melting/Freezing point (OECD 102/EU A1, capillary method) |
Melting range = (12.9 °C - 15.1 °C) (286.1 to 288.3 K) |
Boiling point (OECD 103/EU A2, Cottrell) |
No clear initial boiling point was determined using dynamic method and signs of decomposition were observed |
Relative density (OECD 109/EU A3, pycnometer method) |
1.0668 ± 0.0004 g/cm3 at 20.0 ± 0.2 °C. D20/4 = 1.0668 |
Granulometry (data waiving) |
study scientifically not necessary (not granular / powder) |
Vapour pressure (OECD 104/EU A4, static method) |
359 Pa at 20°C and 486 Pa at 25°C (interpolation) Note that the result obtained on this kind of substance should be largely influence by small amounts of volatile constituents and these values don't represent the major part of the substance. Therefore the result should be considered with caution when used for subsequent assessment (worst case). |
log Kow (data waiving) |
Waived based on technical issue and poor knownledge of the composition of the substance. |
Water solubility (data waiving) |
Waived considering the very complex nature of the test item, the information obtained from testing is considered as not relevant or of practical use for subsequent assessments |
Surface tension (data waiving) |
Waived considering that surface activity is not the intended use of the substance (i.e. not a desired property). |
Auto-ignition temperature (EU A15/DIN51794) |
365°C (976.8 - 1028.4 hPa) |
Flash-point (EU A9)
Flammability (N.1 readily combustible solids)
Flammability water&air (data waiving)
Self-heating substances/mixtures (data waiving) |
169.5°C at 1013 hPa => NOT classified under CLP & GHS. Note that the result obtained on this kind of substance should be largely influence by small amounts of volatile constituents and the result doesn't represent the major part of the substance.
No ignition in contact with a flame: NOT a flammable solid (CLP/GHS). Waived based on experience in handling, testing and use and chemical structure of known constituents of the substance. NOT flammable if contact with air or water Waived based on the physical state (liquid) NO self-heating substance anticipated. |
Explosive properties (data waiving) |
Waived based on experience in handling, testing and use of the substance and chemical structure of known constituents of the substance. LOW potential for explosive properties |
Oxidising properties (data waiving) |
Waived based on technical issue and chemical structure of known constituents of the substance. LOW potential for oxidizing properties |
Slight variations are possible with composition (UVCB substance).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
